4 Cubic Yards of Crushed Stone in Tons
4 cubic yards of crushed stone in tons works out to about 5.6 tons using a planning weight of 1.4 tons per yard. Real loads land between roughly 5.4 and 6.0 tons depending on stone size, fines and moisture. That is about 11,200 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 4 × 1.4 = 5.6 tons.
- Low end: 4 × 1.35 = 5.4 tons.
- High end: 4 × 1.5 = 6.0 tons.
The scale ticket on delivery day is the final word on weight.
What 4 yards covers
| Depth | Square feet |
|---|---|
| 2 in | 648 |
| 3 in | 432 |
| 4 in | 324 |
| 6 in | 216 |
About crushed stone
Crushed stone has fractured faces, so the pieces interlock when compacted. That is why it holds a driveway or pad shape better than round stone of the same size.
Hauling 4 yards
Plan the delivery around 5.6 tons: one small truck in most areas. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices crushed stone by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
Where crushed stone fits
Works well for:
- Driveway top courses and parking pads
- Shed and hot tub bases
- Backfill behind walls when a clean size is used
Less suited to:
- Barefoot areas, since angular stone is rough
- Play areas
- Places that need a smooth rolling surface for wheels
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 14x28 area at 2 inches takes about 3.4 tons.
- Weight used here: about 1.4 tons per cubic yard.
Where estimates go wrong
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
Questions people ask
How many tons is 4 yards of crushed stone?
About 5.6 tons, with a typical range of 5.4 to 6.0.
How many pounds is 4 cubic yards of crushed stone?
About 11,200 pounds.
How much area does 4 yards of crushed stone cover at 4 inches?
About 324 square feet.
Why does crushed stone weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- How Much Does a Ton of Crushed Stone Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 2 Cubic Yards of Crushed Stone in Tons
- 3 Cubic Yards of Crushed Stone in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.