50 Cubic Yards of Decomposed Granite in Tons
50 cubic yards of decomposed granite in tons works out to about 67.5 tons using a planning weight of 1.35 tons per yard. Real loads land between roughly 62.5 and 72.5 tons depending on stone size, fines and moisture. That is about 135,000 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 50 × 1.35 = 67.5 tons.
- Low end: 50 × 1.25 = 62.5 tons.
- High end: 50 × 1.45 = 72.5 tons.
Quarries can tell you the weight per yard for their own product; use it if you have it.
What 50 yards covers
| Depth | Square feet |
|---|---|
| 2 in | 8,100 |
| 3 in | 5,400 |
| 4 in | 4,050 |
About decomposed granite
DG should be laid in thin lifts, wetted and compacted. Loose DG at a deep depth stays soft and tracks onto shoes.
Hauling 50 yards
Plan the delivery around 67.5 tons: two or more trucks in most areas. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices decomposed granite by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
When to choose decomposed granite
Best suited to:
- Garden paths and patios with a natural look
- Around trees and in xeriscape designs
- Stabilized DG for accessible paths
Think twice for:
- Steep grades without a stabilizer
- Areas right outside doors, since fines track in
- Driveways with heavy turning traffic
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of decomposed granite (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 10x20 area at 3 inches takes about 2.5 tons.
- Weight used here: about 1.35 tons per cubic yard.
Common estimating mistakes
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
Questions people ask
How many tons is 50 yards of decomposed granite?
About 67.5 tons, with a typical range of 62.5 to 72.5.
How many pounds is 50 cubic yards of decomposed granite?
About 135,000 pounds.
How much area does 50 yards of decomposed granite cover at 3 inches?
About 5,400 square feet.
Why does decomposed granite weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 30 Cubic Yards of Decomposed Granite in Tons
- 40 Cubic Yards of Decomposed Granite in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.