AsphaltTons.com — asphalt tonnage calculator

How Much #57 Stone for a 16 Foot Circle?

How much #57 stone for a 16 foot circle: about 3.4 tons at 4 inches deep. A circle 16 feet across covers about 201.1 square feet (3.1416 × 8²).

Volume and tonnage calculator →

The math

  1. Area: 201.1 sq ft.
  2. Depth in feet: 4 ÷ 12 = 0.333 ft.
  3. Cubic yards: 201.1 × 0.333 ÷ 27 = 2.48 yd³.
  4. Tons: × about 1.35 tons per yard = 3.4 tons.

The crushed stone calculator does this for any size.

#57 stone needed by depth

DepthCubic yardsTons of #57 stoneTons +10%
2 in1.241.71.8
3 in1.862.52.8
4 in2.483.43.7
6 in3.725.05.5

Using a circle of stone

A round gravel area is easy to lay out with a stake and string at the center. Set flexible edging along the line and lay fabric inside before the stone goes in. Rake the stone level after spreading and add a thin top-up after the first season.

Ordering and delivery

If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. #57 is a washed stone of roughly 1/2 to 1 inch with few fines; it drains fast but stays a little loose on its own. Round up by about 10 percent for compaction and uneven ground.

Measuring the area

Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.

Common mistakes

People often forget that compaction reduces volume, so they come up short. Others order clean, round stone where a packable crushed stone with fines would have stayed put. Finally, dumping the whole load in one pile far from the work area adds hours of wheelbarrow trips.

Questions people ask

How many tons of #57 stone for a 16 ft circle?

About 3.4 tons at 4 inches deep.

How many square feet is a 16 foot circle?

About 201.1 square feet.

How many tons of #57 stone are in a cubic yard?

Roughly 1.35 tons for planning, but suppliers vary with stone size and moisture.

Do I need to compact it?

Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.

Related guides

Open the volume and tonnage calculator → Asphalt tonnage calculator →

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.

Related answers