How Much Gravel for a 10 Foot Circle?
How much gravel for a 10 foot circle: about 1.4 tons at 4 inches deep. A circle 10 feet across covers about 78.5 square feet (3.1416 × 5²).
Volume and tonnage calculator →The math
- Area: 78.5 sq ft.
- Depth in feet: 4 ÷ 12 = 0.333 ft.
- Cubic yards: 78.5 × 0.333 ÷ 27 = 0.97 yd³.
- Tons: × about 1.4 tons per yard = 1.4 tons.
The gravel calculator does this for any size.
Related: How Much Pea Gravel for a 10 Foot Circle?
Gravel needed by depth
| Depth | Cubic yards | Tons of gravel | Tons +10% |
|---|---|---|---|
| 2 in | 0.48 | 0.7 | 0.7 |
| 3 in | 0.73 | 1.0 | 1.1 |
| 4 in | 0.97 | 1.4 | 1.5 |
| 6 in | 1.45 | 2.0 | 2.2 |
Where round stone areas work
A round gravel area is easy to lay out with a stake and string at the center. Set flexible edging along the line and lay fabric inside before the stone goes in. Rake the stone level after spreading and add a thin top-up after the first season.
Related: How Much River Rock for a 10 Foot Circle?
Getting it delivered
Most quarries and landscape yards deliver by the ton; ask whether there is a minimum and a delivery fee, and where the driver can dump without damaging your lawn. Gravel is a broad label, so confirm whether the yard means crushed or rounded stone and whether it carries fines. The scale ticket is the real weight; tons per yard here is a planning figure.
Common mistakes
The most frequent problem is ordering for the finished depth without allowing for compaction, which can shrink a loose layer by 10 to 20 percent. Another is skipping fabric on soft soil and watching the stone vanish into the mud over the first wet season. Spreading everything in one thick layer instead of compacted lifts also leaves a soft, rutted surface.
Tools for the job
For anything bigger than a small path, rent a plate compactor; hand tampers cannot match it. A wheelbarrow, shovels, a hard rake and stakes with string are the rest of the kit. Wet the stone lightly before compacting so it binds.
Questions people ask
How many tons of gravel for a 10 ft circle?
About 1.4 tons at 4 inches deep.
How many square feet is a 10 foot circle?
About 78.5 square feet.
How many tons of gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Fire Pit Area: Best Types and Depth
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crushed Stone for a 10 Foot Circle?
- How Much #57 Stone for a 10 Foot Circle?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.