How Much Gravel for a 30x48 Pole Barn?
How much gravel for a 30x48 pole barn: about 37.3 tons for a 6-inch pad covering the 1,440 square foot footprint. Many builders extend the pad a foot or two past the walls, which adds material.
Volume and tonnage calculator →The math
- Area: 1,440.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 1,440.0 × 0.500 ÷ 27 = 26.67 yd³.
- Tons: × about 1.4 tons per yard = 37.3 tons.
The gravel calculator does this for any size.
Related: How Much Crushed Stone for a 30x48 Pole Barn?
Gravel needed by depth
| Depth | Cubic yards | Tons of gravel | Tons +10% |
|---|---|---|---|
| 4 in | 17.78 | 24.9 | 27.4 |
| 6 in | 26.67 | 37.3 | 41.1 |
| 8 in | 35.56 | 49.8 | 54.8 |
| 12 in | 53.33 | 74.7 | 82.1 |
How deep the barn pad should be
A 4-inch layer works for storage and light use on firm soil. For equipment, vehicles or a future concrete floor, 6 to 8 inches of compacted stone is common, and soft ground may need more plus fabric underneath.
Related: How Much #57 Stone for a 30x48 Pole Barn?
Extending the pad past the walls
Many owners run the stone 1 foot beyond each wall: 32x50 feet, 1,600 sq ft, about 41.5 tons at 6 inches. It keeps mud away from the doors and protects the post bases.
Build it in layers
Remove sod and organic soil first. Compact the subgrade, then place and compact the stone in thin lifts. If the barn floor will be stone permanently, finish with a material that has fines so it packs firm.
Buying the stone
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Gravel is a broad label, so confirm whether the yard means crushed or rounded stone and whether it carries fines. Ask your supplier for their own tons-per-yard number, since stone source and moisture change it.
Questions people ask
How many tons of gravel for a 30x48 pole barn?
About 37.3 tons at 6 inches deep.
How many yards of gravel for a 30x48 pad?
About 26.67 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for a 30x30 Pole Barn?
- How Much Gravel for a 30x40 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.