How Much Gravel for a 60x80 Pole Barn?
A 60 by 80 pole barn covers 4,800 square feet. Spread 6 inches deep, the pad takes about 88.89 cubic yards, which is roughly 124.4 tons of gravel. That answers how much gravel for a 60x80 pole barn for a typical floor base.
Volume and tonnage calculator →The math
- Area: 4,800.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 4,800.0 × 0.500 ÷ 27 = 88.89 yd³.
- Tons: × about 1.4 tons per yard = 124.4 tons.
The gravel calculator does this for any size.
Related: How Much Crushed Stone for a 60x80 Pole Barn?
Gravel needed by depth
| Depth | Cubic yards | Tons of gravel | Tons +10% |
|---|---|---|---|
| 4 in | 59.26 | 83.0 | 91.3 |
| 6 in | 88.89 | 124.4 | 136.9 |
| 8 in | 118.52 | 165.9 | 182.5 |
| 12 in | 177.78 | 248.9 | 273.8 |
Pole barn pad depth
A 4-inch layer works for storage and light use on firm soil. For equipment, vehicles or a future concrete floor, 6 to 8 inches of compacted stone is common, and soft ground may need more plus fabric underneath.
Related: How Much #57 Stone for a 60x80 Pole Barn?
Extending the pad past the walls
Adding 1 foot on every side makes the pad 62x82, or 5,084 sq ft. At 6 inches that is about 131.8 tons. A wider apron sheds water away from the posts and gives the eave drip a place to land.
Layering the base
Strip topsoil, level and compact the subgrade, then spread stone in lifts of about 3 to 4 inches, compacting each. A coarser base topped with a finer, packable stone often makes the most solid floor.
Buying the stone
Most quarries and landscape yards deliver by the ton; ask whether there is a minimum and a delivery fee, and where the driver can dump without damaging your lawn. Gravel is a broad label, so confirm whether the yard means crushed or rounded stone and whether it carries fines. The scale ticket is the real weight; tons per yard here is a planning figure.
Questions people ask
How many tons of gravel for a 60x80 pole barn?
About 124.4 tons at 6 inches deep.
How many yards of gravel for a 60x80 pad?
About 88.89 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for a 48x64 Pole Barn?
- How Much Gravel for a 50x80 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.