Bags of Crushed Stone for a 3x25 Walkway
How many bags of crushed stone for a 3x25 walkway: at 3 inches deep you need about 18.8 cubic feet, which is 38 bags of the common 0.5 cubic foot size. If your store sells crushed stone in 50-pound bags instead, figure about 39 bags, since crushed stone weighs roughly 104 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 6.2 | 13 | 13 |
| 2 in | 12.5 | 25 | 26 |
| 3 in | 18.8 | 38 | 39 |
| 4 in | 25.0 | 50 | 52 |
How to figure it
- Area: 3 × 25 = 75 sq ft.
- Volume: 75 × (3 ÷ 12) = 18.8 cu ft.
- Bags: 18.8 ÷ 0.5 = 38 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 18.8 cubic feet is 0.69 yards, about 1.0 tons. Under a yard, bags save a delivery fee and are easy to haul in a car or pickup. Compare the bag price × 38 against a bulk quote for 1.1 tons delivered.
About crushed stone
Crushed stone has fractured faces, so the pieces interlock when compacted. That is why it holds a driveway or pad shape better than round stone of the same size.
Laying it down for a walkway
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then tamp or wet and compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Where crushed stone fits
Good uses:
- Driveway top courses and parking pads
- Shed and hot tub bases
- Backfill behind walls when a clean size is used
Poor fit for:
- Barefoot areas, since angular stone is rough
- Play areas
- Places that need a smooth rolling surface for wheels
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 12x24 area at 2 inches takes about 2.5 tons.
- Weight used here: about 1.4 tons per cubic yard.
Mistakes that throw off the order
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
Questions people ask
How many bags of crushed stone for a 3x25 walkway?
About 38 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of crushed stone for 3x25?
About 39 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 3x25 walkway at 3 inches?
About 18.8 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of Crushed Stone Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Crushed Stone for a 3x15 Walkway
- Bags of Crushed Stone for a 3x20 Walkway
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.