Bags of Crushed Stone for a 3x40 Walkway
How many bags of crushed stone for a 3x40 walkway: at 3 inches deep you need about 30.0 cubic feet, which is 60 bags of the common 0.5 cubic foot size. If your store sells crushed stone in 50-pound bags instead, figure about 63 bags, since crushed stone weighs roughly 104 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 10.0 | 20 | 21 |
| 2 in | 20.0 | 40 | 42 |
| 3 in | 30.0 | 60 | 63 |
| 4 in | 40.0 | 80 | 83 |
How to figure it
- Area: 3 × 40 = 120 sq ft.
- Volume: 120 × (3 ÷ 12) = 30.0 cu ft.
- Bags: 30.0 ÷ 0.5 = 60 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 30.0 cubic feet is 1.11 yards, about 1.6 tons. Past about a yard, bulk is usually less work and often less money. Compare the bag price × 60 against a bulk quote for 1.7 tons delivered.
About crushed stone
Crushed stone has fractured faces, so the pieces interlock when compacted. That is why it holds a driveway or pad shape better than round stone of the same size.
Before you spread for a walkway
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then tamp or wet and compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
When to choose crushed stone
Works well for:
- Driveway top courses and parking pads
- Shed and hot tub bases
- Backfill behind walls when a clean size is used
Poor fit for:
- Barefoot areas, since angular stone is rough
- Play areas
- Places that need a smooth rolling surface for wheels
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 8x16 area at 2 inches takes about 1.1 tons.
- Weight used here: about 1.4 tons per cubic yard.
Mistakes that throw off the order
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
Questions people ask
How many bags of crushed stone for a 3x40 walkway?
About 60 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of crushed stone for 3x40?
About 63 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 3x40 walkway at 3 inches?
About 30.0 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of Crushed Stone Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Crushed Stone for a 3x25 Walkway
- Bags of Crushed Stone for a 3x30 Walkway
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.