AsphaltTons.com — asphalt tonnage calculator

Bags of Crushed Stone for a 8x10 Patio

How many bags of crushed stone for a 8x10 patio: at 3 inches deep you need about 20.0 cubic feet, which is 40 bags of the common 0.5 cubic foot size. If your store sells crushed stone in 50-pound bags instead, figure about 42 bags, since crushed stone weighs roughly 104 pounds per cubic foot.

Volume and tonnage calculator →

Bag count by depth

DepthCubic feet0.5 cu ft bags50 lb bags (approx.)
1 in6.71414
2 in13.32728
3 in20.04042
4 in26.75456

How to figure it

  1. Area: 8 × 10 = 80 sq ft.
  2. Volume: 80 × (3 ÷ 12) = 20.0 cu ft.
  3. Bags: 20.0 ÷ 0.5 = 40 bags (round up).

Bags or bulk?

A cubic yard is 27 cubic feet, so 20.0 cubic feet is 0.74 yards, about 1.0 tons. This is a small enough job that bags are reasonable, especially if a bulk delivery fee applies. Compare the bag price × 40 against a bulk quote for 1.1 tons delivered.

About crushed stone

Most quarries sell crushed stone by a size number or a screen size. Clean crushed stone drains well; stone with fines packs harder but sheds water more slowly.

Before you spread for a patio

  • Dig and level. Remove sod and set the base slightly below the surrounding grade.
  • Edge it. Steel, plastic or stone edging keeps material in place.
  • Spread in layers. Rake to depth, then tamp or wet and compact.
  • Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.

The volume and tonnage calculator handles other sizes and depths.

Where crushed stone fits

Best suited to:

  • Driveway top courses and parking pads
  • Shed and hot tub bases
  • Backfill behind walls when a clean size is used

Less suited to:

  • Barefoot areas, since angular stone is rough
  • Play areas
  • Places that need a smooth rolling surface for wheels

Quick reference numbers

  • Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
  • Per inch over 1,000 sq ft: about 4.3 tons.
  • Another size for comparison: a 20x25 area at 4 inches takes about 8.6 tons.
  • Weight used here: about 1.4 tons per cubic yard.

Where estimates go wrong

  • Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
  • Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
  • Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
  • Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.

Questions people ask

How many bags of crushed stone for a 8x10 patio?

About 40 bags of 0.5 cubic feet at 3 inches deep.

How many 50 lb bags of crushed stone for 8x10?

About 42 bags at 3 inches.

How many 0.5 cubic foot bags are in a cubic yard?

54 bags.

How many cubic feet is a 8x10 patio at 3 inches?

About 20.0 cubic feet.

When does bulk make more sense?

Usually once the job passes about a cubic yard, or when you would need more than a few car trips.

Related guides

Open the volume and tonnage calculator → Asphalt tonnage calculator →

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.