AsphaltTons.com — asphalt tonnage calculator

Bags of Decomposed Granite for a 14x10 Patio

How many bags of decomposed granite for a 14x10 patio: at 3 inches deep you need about 35.0 cubic feet, which is 70 bags of the common 0.5 cubic foot size. If your store sells decomposed granite in 50-pound bags instead, figure about 70 bags, since decomposed granite weighs roughly 100 pounds per cubic foot.

Volume and tonnage calculator →

Bag count by depth

DepthCubic feet0.5 cu ft bags50 lb bags (approx.)
1 in11.72424
2 in23.34747
3 in35.07070
4 in46.79494

How to figure it

  1. Area: 14 × 10 = 140 sq ft.
  2. Volume: 140 × (3 ÷ 12) = 35.0 cu ft.
  3. Bags: 35.0 ÷ 0.5 = 70 bags (round up).

Bags or bulk?

A cubic yard is 27 cubic feet, so 35.0 cubic feet is 1.30 yards, about 1.8 tons. Past about a yard, bulk is usually less work and often less money. Compare the bag price × 70 against a bulk quote for 1.9 tons delivered.

About decomposed granite

DG should be laid in thin lifts, wetted and compacted. Loose DG at a deep depth stays soft and tracks onto shoes.

Laying it down for a patio

  • Dig and level. Remove sod and set the base slightly below the surrounding grade.
  • Edge it. Steel, plastic or stone edging keeps material in place.
  • Spread in layers. Rake to depth, then tamp or wet and compact.
  • Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.

The volume and tonnage calculator handles other sizes and depths.

When to choose decomposed granite

Works well for:

  • Garden paths and patios with a natural look
  • Around trees and in xeriscape designs
  • Stabilized DG for accessible paths

Less suited to:

  • Steep grades without a stabilizer
  • Areas right outside doors, since fines track in
  • Driveways with heavy turning traffic

Quick reference numbers

  • Per inch over 100 sq ft: about 0.42 tons of decomposed granite (0.31 cubic yards).
  • Per inch over 1,000 sq ft: about 4.2 tons.
  • Another size for comparison: a 10x20 area at 2 inches takes about 1.7 tons.
  • Weight used here: about 1.35 tons per cubic yard.

Where estimates go wrong

  • Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
  • Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
  • Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
  • Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.

Questions people ask

How many bags of decomposed granite for a 14x10 patio?

About 70 bags of 0.5 cubic feet at 3 inches deep.

How many 50 lb bags of decomposed granite for 14x10?

About 70 bags at 3 inches.

How many 0.5 cubic foot bags are in a cubic yard?

54 bags.

How many cubic feet is a 14x10 patio at 3 inches?

About 35.0 cubic feet.

When does bulk make more sense?

Usually once the job passes about a cubic yard, or when you would need more than a few car trips.

Related guides

Open the volume and tonnage calculator → Asphalt tonnage calculator →

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.