Bags of Limestone Screenings for a 5x15 Walkway
How many bags of limestone screenings for a 5x15 walkway: at 2 inches deep you need about 12.5 cubic feet, which is 25 bags of the common 0.5 cubic foot size. If your store sells limestone screenings in 50-pound bags instead, figure about 26 bags, since limestone screenings weighs roughly 104 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 6.2 | 13 | 13 |
| 2 in | 12.5 | 25 | 26 |
| 3 in | 18.8 | 38 | 39 |
| 4 in | 25.0 | 50 | 52 |
How to figure it
- Area: 5 × 15 = 75 sq ft.
- Volume: 75 × (2 ÷ 12) = 12.5 cu ft.
- Bags: 12.5 ÷ 0.5 = 25 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 12.5 cubic feet is 0.46 yards, about 0.6 tons. Under a yard, bags save a delivery fee and are easy to haul in a car or pickup. Compare the bag price × 25 against a bulk quote for 0.7 tons delivered.
About limestone screenings
Limestone screenings are the fine dust and chips left after crushing limestone. They pack very tight, which makes them a common setting bed for pavers and flagstone and a surface for paths.
Before you spread for a walkway
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then tamp or wet and compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Where limestone screenings fits
Best suited to:
- Paver and flagstone setting beds
- Firm walking paths
- Top-dressing a compacted stone base
Poor fit for:
- Deep layers on their own
- Low spots that collect water
- Under heavy vehicle traffic without a base
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of limestone screenings (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 14x28 area at 4 inches takes about 6.8 tons.
- Weight used here: about 1.4 tons per cubic yard.
Where estimates go wrong
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
Questions people ask
How many bags of limestone screenings for a 5x15 walkway?
About 25 bags of 0.5 cubic feet at 2 inches deep.
How many 50 lb bags of limestone screenings for 5x15?
About 26 bags at 2 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 5x15 walkway at 2 inches?
About 12.5 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- #10 Stone (Stone Dust): Size, Uses and How Many Tons
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Limestone Screenings for a 4x100 Walkway
- Bags of Limestone Screenings for a 5x10 Walkway
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.