Bags of Pea Gravel for a 10x30 Patio
How many bags of pea gravel for a 10x30 patio: at 3 inches deep you need about 75.0 cubic feet, which is 150 bags of the common 0.5 cubic foot size. If your store sells pea gravel in 50-pound bags instead, figure about 156 bags, since pea gravel weighs roughly 104 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 25.0 | 50 | 52 |
| 2 in | 50.0 | 100 | 104 |
| 3 in | 75.0 | 150 | 156 |
| 4 in | 100.0 | 200 | 208 |
How to figure it
- Area: 10 × 30 = 300 sq ft.
- Volume: 300 × (3 ÷ 12) = 75.0 cu ft.
- Bags: 75.0 ÷ 0.5 = 150 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 75.0 cubic feet is 2.78 yards, about 3.9 tons. Past about a yard, bulk is usually less work and often less money. Compare the bag price × 150 against a bulk quote for 4.3 tons delivered.
About pea gravel
Because pea gravel is round, it never fully locks. Keep depths modest on walkways and patios so it does not feel like walking on a beach, and use edging.
Before you spread for a patio
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then rake smooth; rounded stone will not compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Good and poor uses for pea gravel
Good uses:
- Patios, walkways and dog runs
- Play areas with proper depth and edging
- Drainage around foundations when sized properly
Think twice for:
- Driveways and steep paths, where it rolls and ruts
- Under pavers as a base
- Areas without edging
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of pea gravel (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 8x16 area at 2 inches takes about 1.1 tons.
- Weight used here: about 1.4 tons per cubic yard.
Where estimates go wrong
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
Questions people ask
How many bags of pea gravel for a 10x30 patio?
About 150 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of pea gravel for 10x30?
About 156 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 10x30 patio at 3 inches?
About 75.0 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Pea Gravel for a 10x20 Patio
- Bags of Pea Gravel for a 10x24 Patio
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.