AsphaltTons.com — asphalt tonnage calculator

Bags of Pea Gravel for a 6x30 Walkway

How many bags of pea gravel for a 6x30 walkway: at 3 inches deep you need about 45.0 cubic feet, which is 90 bags of the common 0.5 cubic foot size. If your store sells pea gravel in 50-pound bags instead, figure about 94 bags, since pea gravel weighs roughly 104 pounds per cubic foot.

Volume and tonnage calculator →

Bag count by depth

DepthCubic feet0.5 cu ft bags50 lb bags (approx.)
1 in15.03032
2 in30.06063
3 in45.09094
4 in60.0120125

How to figure it

  1. Area: 6 × 30 = 180 sq ft.
  2. Volume: 180 × (3 ÷ 12) = 45.0 cu ft.
  3. Bags: 45.0 ÷ 0.5 = 90 bags (round up).

Bags or bulk?

A cubic yard is 27 cubic feet, so 45.0 cubic feet is 1.67 yards, about 2.3 tons. Past about a yard, bulk is usually less work and often less money. Compare the bag price × 90 against a bulk quote for 2.6 tons delivered.

About pea gravel

Pea gravel is small, rounded stone, usually around 3/8 inch. It is comfortable to walk on and drains well, but it shifts under car tires and needs a solid edge to stay put.

Before you spread for a walkway

  • Dig and level. Remove sod and set the base slightly below the surrounding grade.
  • Edge it. Steel, plastic or stone edging keeps material in place.
  • Spread in layers. Rake to depth, then rake smooth; rounded stone will not compact.
  • Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.

The volume and tonnage calculator handles other sizes and depths.

Good and poor uses for pea gravel

Works well for:

  • Patios, walkways and dog runs
  • Play areas with proper depth and edging
  • Drainage around foundations when sized properly

Think twice for:

  • Driveways and steep paths, where it rolls and ruts
  • Under pavers as a base
  • Areas without edging

Quick reference numbers

  • Per inch over 100 sq ft: about 0.43 tons of pea gravel (0.31 cubic yards).
  • Per inch over 1,000 sq ft: about 4.3 tons.
  • Another size for comparison: a 14x28 area at 4 inches takes about 6.8 tons.
  • Weight used here: about 1.4 tons per cubic yard.

Where estimates go wrong

  • Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
  • Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
  • Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
  • Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.

Questions people ask

How many bags of pea gravel for a 6x30 walkway?

About 90 bags of 0.5 cubic feet at 3 inches deep.

How many 50 lb bags of pea gravel for 6x30?

About 94 bags at 3 inches.

How many 0.5 cubic foot bags are in a cubic yard?

54 bags.

How many cubic feet is a 6x30 walkway at 3 inches?

About 45.0 cubic feet.

When does bulk make more sense?

Usually once the job passes about a cubic yard, or when you would need more than a few car trips.

Related guides

Open the volume and tonnage calculator → Asphalt tonnage calculator →

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.