Bags of River Rock for a 20x30 Patio
How many bags of river rock for a 20x30 patio: at 3 inches deep you need about 150.0 cubic feet, which is 300 bags of the common 0.5 cubic foot size. If your store sells river rock in 50-pound bags instead, figure about 300 bags, since river rock weighs roughly 100 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 50.0 | 100 | 100 |
| 2 in | 100.0 | 200 | 200 |
| 3 in | 150.0 | 300 | 300 |
| 4 in | 200.0 | 400 | 400 |
How to figure it
- Area: 20 × 30 = 600 sq ft.
- Volume: 600 × (3 ÷ 12) = 150.0 cu ft.
- Bags: 150.0 ÷ 0.5 = 300 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 150.0 cubic feet is 5.56 yards, about 7.5 tons. Past about a yard, bulk is usually less work and often less money. Compare the bag price × 300 against a bulk quote for 8.2 tons delivered.
About river rock
River rock is mostly decorative and for drainage beds. It is not meant to be driven on and tends to roll if used as a walking surface.
Before you spread for a patio
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then rake smooth; rounded stone will not compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
When to choose river rock
Best suited to:
- Dry creek beds and drainage swales
- Decorative borders and planting beds
- Around downspouts to stop splash erosion
Poor fit for:
- Walking surfaces
- Driveways
- Bases under slabs or pavers
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of river rock (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 8x16 area at 3 inches takes about 1.6 tons.
- Weight used here: about 1.35 tons per cubic yard.
Mistakes that throw off the order
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
Questions people ask
How many bags of river rock for a 20x30 patio?
About 300 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of river rock for 20x30?
About 300 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 20x30 patio at 3 inches?
About 150.0 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of River Rock Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.