Bags of River Rock for a 6x15 Walkway
How many bags of river rock for a 6x15 walkway: at 3 inches deep you need about 22.5 cubic feet, which is 45 bags of the common 0.5 cubic foot size. If your store sells river rock in 50-pound bags instead, figure about 45 bags, since river rock weighs roughly 100 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 7.5 | 15 | 15 |
| 2 in | 15.0 | 30 | 30 |
| 3 in | 22.5 | 45 | 45 |
| 4 in | 30.0 | 60 | 60 |
How to figure it
- Area: 6 × 15 = 90 sq ft.
- Volume: 90 × (3 ÷ 12) = 22.5 cu ft.
- Bags: 22.5 ÷ 0.5 = 45 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 22.5 cubic feet is 0.83 yards, about 1.1 tons. This is a small enough job that bags are reasonable, especially if a bulk delivery fee applies. Compare the bag price × 45 against a bulk quote for 1.2 tons delivered.
About river rock
River rock is smooth, water-worn stone sold in sizes from about 3/4 inch to several inches. Larger sizes cover fewer square feet per ton at the same depth because the voids between stones are bigger.
Before you spread for a walkway
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then rake smooth; rounded stone will not compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Good and poor uses for river rock
Works well for:
- Dry creek beds and drainage swales
- Decorative borders and planting beds
- Around downspouts to stop splash erosion
Less suited to:
- Walking surfaces
- Driveways
- Bases under slabs or pavers
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of river rock (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 10x20 area at 3 inches takes about 2.5 tons.
- Weight used here: about 1.35 tons per cubic yard.
Common estimating mistakes
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
Questions people ask
How many bags of river rock for a 6x15 walkway?
About 45 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of river rock for 6x15?
About 45 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 6x15 walkway at 3 inches?
About 22.5 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of River Rock Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of River Rock for a 5x100 Walkway
- Bags of River Rock for a 6x10 Walkway
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.