Bags of River Rock for a 6x25 Walkway
How many bags of river rock for a 6x25 walkway: at 3 inches deep you need about 37.5 cubic feet, which is 75 bags of the common 0.5 cubic foot size. If your store sells river rock in 50-pound bags instead, figure about 75 bags, since river rock weighs roughly 100 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 12.5 | 25 | 25 |
| 2 in | 25.0 | 50 | 50 |
| 3 in | 37.5 | 75 | 75 |
| 4 in | 50.0 | 100 | 100 |
How to figure it
- Area: 6 × 25 = 150 sq ft.
- Volume: 150 × (3 ÷ 12) = 37.5 cu ft.
- Bags: 37.5 ÷ 0.5 = 75 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 37.5 cubic feet is 1.39 yards, about 1.9 tons. Past about a yard, bulk is usually less work and often less money. Compare the bag price × 75 against a bulk quote for 2.1 tons delivered.
About river rock
River rock is mostly decorative and for drainage beds. It is not meant to be driven on and tends to roll if used as a walking surface.
Before you spread for a walkway
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then rake smooth; rounded stone will not compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Where river rock fits
Works well for:
- Dry creek beds and drainage swales
- Decorative borders and planting beds
- Around downspouts to stop splash erosion
Poor fit for:
- Walking surfaces
- Driveways
- Bases under slabs or pavers
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of river rock (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 10x20 area at 2 inches takes about 1.7 tons.
- Weight used here: about 1.35 tons per cubic yard.
Common estimating mistakes
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
Questions people ask
How many bags of river rock for a 6x25 walkway?
About 75 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of river rock for 6x25?
About 75 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 6x25 walkway at 3 inches?
About 37.5 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of River Rock Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of River Rock for a 6x15 Walkway
- Bags of River Rock for a 6x20 Walkway
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.