Bags of Sand for a 14x24 Patio
How many bags of sand for a 14x24 patio: at 2 inches deep you need about 56.0 cubic feet, which is 112 bags of the common 0.5 cubic foot size. If your store sells sand in 50-pound bags instead, figure about 112 bags, since sand weighs roughly 100 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 28.0 | 56 | 56 |
| 2 in | 56.0 | 112 | 112 |
| 3 in | 84.0 | 168 | 168 |
| 4 in | 112.0 | 224 | 224 |
How to figure it
- Area: 14 × 24 = 336 sq ft.
- Volume: 336 × (2 ÷ 12) = 56.0 cu ft.
- Bags: 56.0 ÷ 0.5 = 112 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 56.0 cubic feet is 2.07 yards, about 2.8 tons. At this size, a bulk delivery usually beats a cart full of bags once you count trips. Compare the bag price × 112 against a bulk quote for 3.1 tons delivered.
About sand
Sand weight changes a lot with moisture. Damp sand can weigh noticeably more per yard than dry sand, so a ton of wet sand covers less area than the same ton dry.
Install tips for a patio
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then tamp or wet and compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Good and poor uses for sand
Best suited to:
- Paver and flagstone bedding
- Leveling under above-ground pools (with the right product)
- Filling joints and backfilling pipe
Poor fit for:
- Driveway bases, since sand shifts under load
- Steep areas exposed to runoff
- Thick layers under pavers, which settle unevenly
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of sand (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 15x30 area at 4 inches takes about 7.5 tons.
- Weight used here: about 1.35 tons per cubic yard.
Common estimating mistakes
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
Questions people ask
How many bags of sand for a 14x24 patio?
About 112 bags of 0.5 cubic feet at 2 inches deep.
How many 50 lb bags of sand for 14x24?
About 112 bags at 2 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 14x24 patio at 2 inches?
About 56.0 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of Sand Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Sand for a 14x18 Patio
- Bags of Sand for a 14x20 Patio
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.