Bags of Sand for a 4x100 Walkway
How many bags of sand for a 4x100 walkway: at 2 inches deep you need about 66.7 cubic feet, which is 134 bags of the common 0.5 cubic foot size. If your store sells sand in 50-pound bags instead, figure about 134 bags, since sand weighs roughly 100 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 33.3 | 67 | 67 |
| 2 in | 66.7 | 134 | 134 |
| 3 in | 100.0 | 200 | 200 |
| 4 in | 133.3 | 267 | 267 |
How to figure it
- Area: 4 × 100 = 400 sq ft.
- Volume: 400 × (2 ÷ 12) = 66.7 cu ft.
- Bags: 66.7 ÷ 0.5 = 134 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 66.7 cubic feet is 2.47 yards, about 3.3 tons. At this size, a bulk delivery usually beats a cart full of bags once you count trips. Compare the bag price × 134 against a bulk quote for 3.7 tons delivered.
About sand
Sand weight changes a lot with moisture. Damp sand can weigh noticeably more per yard than dry sand, so a ton of wet sand covers less area than the same ton dry.
Install tips for a walkway
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then tamp or wet and compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
When to choose sand
Works well for:
- Paver and flagstone bedding
- Leveling under above-ground pools (with the right product)
- Filling joints and backfilling pipe
Think twice for:
- Driveway bases, since sand shifts under load
- Steep areas exposed to runoff
- Thick layers under pavers, which settle unevenly
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of sand (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 14x28 area at 2 inches takes about 3.3 tons.
- Weight used here: about 1.35 tons per cubic yard.
Where estimates go wrong
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
Questions people ask
How many bags of sand for a 4x100 walkway?
About 134 bags of 0.5 cubic feet at 2 inches deep.
How many 50 lb bags of sand for 4x100?
About 134 bags at 2 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 4x100 walkway at 2 inches?
About 66.7 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of Sand Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Sand for a 4x60 Walkway
- Bags of Sand for a 4x75 Walkway
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.