Bags of Sand for a 8x16 Patio
How many bags of sand for a 8x16 patio: at 2 inches deep you need about 21.3 cubic feet, which is 43 bags of the common 0.5 cubic foot size. If your store sells sand in 50-pound bags instead, figure about 43 bags, since sand weighs roughly 100 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 10.7 | 22 | 22 |
| 2 in | 21.3 | 43 | 43 |
| 3 in | 32.0 | 64 | 64 |
| 4 in | 42.7 | 86 | 86 |
How to figure it
- Area: 8 × 16 = 128 sq ft.
- Volume: 128 × (2 ÷ 12) = 21.3 cu ft.
- Bags: 21.3 ÷ 0.5 = 43 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 21.3 cubic feet is 0.79 yards, about 1.1 tons. Under a yard, bags save a delivery fee and are easy to haul in a car or pickup. Compare the bag price × 43 against a bulk quote for 1.2 tons delivered.
About sand
Sand weight changes a lot with moisture. Damp sand can weigh noticeably more per yard than dry sand, so a ton of wet sand covers less area than the same ton dry.
Laying it down for a patio
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then tamp or wet and compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Good and poor uses for sand
Best suited to:
- Paver and flagstone bedding
- Leveling under above-ground pools (with the right product)
- Filling joints and backfilling pipe
Less suited to:
- Driveway bases, since sand shifts under load
- Steep areas exposed to runoff
- Thick layers under pavers, which settle unevenly
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of sand (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 12x24 area at 2 inches takes about 2.4 tons.
- Weight used here: about 1.35 tons per cubic yard.
Where estimates go wrong
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
Questions people ask
How many bags of sand for a 8x16 patio?
About 43 bags of 0.5 cubic feet at 2 inches deep.
How many 50 lb bags of sand for 8x16?
About 43 bags at 2 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 8x16 patio at 2 inches?
About 21.3 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of Sand Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Sand for a 8x12 Patio
- Bags of Sand for a 8x14 Patio
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.