How Much Asphalt Millings for 1,000 Square Feet?
How much asphalt millings for 1,000 square feet depends on depth. At 4 inches you need about 12.35 cubic yards, roughly 16.0 tons at 1.3 tons per yard. Each inch of depth over 1,000 square feet adds about 3.09 yards.
Volume and tonnage calculator →Asphalt millings for 1,000 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 3 in | 9.26 | 12.0 | 13.2 |
| 4 in | 12.35 | 16.0 | 17.7 |
| 6 in | 18.52 | 24.1 | 26.5 |
Working it out
- 1,000 sq ft × (4 ÷ 12) ft = 333.3 cubic feet.
- ÷ 27 = 12.35 cubic yards.
- × 1.3 tons per yard = 16.0 tons.
About asphalt millings
Millings vary by source: some loads are fine and uniform, others carry chunks. Ask the supplier for a screened product if you want a smoother finish, and check local rules, since some areas restrict their use near water. Typical weight: 1.2 to 1.4 loose tons per cubic yard.
Getting the order right
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Where asphalt millings fits
Good uses:
- Rural driveways and farm lanes
- Parking areas where a dust-free surface is wanted
- Low-cost base under a future paved surface
Poor fit for:
- Areas near wells or streams where local rules limit them
- Decorative or barefoot areas
- Jobs needing a uniform, clean look
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of asphalt millings (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 15x30 area at 4 inches takes about 7.2 tons.
- Weight used here: about 1.3 tons per cubic yard.
Common estimating mistakes
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Questions people ask
How many tons of asphalt millings for 1,000 square feet?
About 16.0 tons at 4 inches deep.
How many cubic yards of asphalt millings for 1,000 square feet?
About 12.35 yards at 4 inches.
How much asphalt millings for 1,000 square feet at 3 inches?
About 12.0 tons, or 9.26 cubic yards.
How much does a yard of asphalt millings weigh?
About 1.2 to 1.4 loose tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- How Many Tons of Asphalt Millings for a 40x25 Area?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Asphalt Millings for 750 Square Feet?
- How Much Asphalt Millings for 800 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.