How Much Asphalt Millings for a 150 Foot Driveway?
A 150-foot driveway at the common 12-foot width covers 1,800 square feet. Spread 4 inches deep, how much asphalt millings for a 150 foot driveway comes to roughly 28.9 tons.
Volume and tonnage calculator →The math
- Area: 1,800.0 sq ft.
- Depth in feet: 4 ÷ 12 = 0.333 ft.
- Cubic yards: 1,800.0 × 0.333 ÷ 27 = 22.22 yd³.
- Tons: × about 1.3 tons per yard = 28.9 tons.
The asphalt millings calculator does this for any size.
Related: How Much Gravel for a 150 Foot Driveway?
Asphalt millings needed by depth
| Depth | Cubic yards | Tons of asphalt millings | Tons +10% |
|---|---|---|---|
| 2 in | 11.11 | 14.4 | 15.9 |
| 4 in | 22.22 | 28.9 | 31.8 |
| 6 in | 33.33 | 43.3 | 47.7 |
| 8 in | 44.44 | 57.8 | 63.6 |
Tons by driveway width
| Width | Tons at 4 in | Tons at 6 in |
|---|---|---|
| 10 ft | 24.1 | 36.1 |
| 12 ft | 28.9 | 43.3 |
| 14 ft | 33.7 | 50.6 |
| 16 ft | 38.5 | 57.8 |
Related: How Much Asphalt Millings for 150 Square Feet?
Truck loads
Plan for about 31.8 tons with waste. On a 15-ton truck that is about 3 trips; spreading while dumping (a tailgate spread) puts the stone close to where it belongs.
Base and top layer
A new driveway usually starts with a larger base stone on compacted subgrade, then a top layer that packs. Topping up an existing drive takes much less, often 2 inches. Add culverts or ditches where water crosses the drive.
Ordering and delivery
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Asphalt millings bind into a fairly firm surface when compacted and warmed by the sun. The scale ticket is the real weight; tons per yard here is a planning figure.
Questions people ask
How many tons of asphalt millings for a 150 ft driveway?
About 28.9 tons at 12 ft wide and 4 inches deep.
How many truck loads for a 150 ft driveway?
About 3 loads of 15 tons, including some extra.
How many tons of asphalt millings are in a cubic yard?
Roughly 1.3 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- How to Build a Gravel Driveway That Lasts
- How Much Gravel for a 100 Foot Driveway? Tons by Depth
- A Passing Pullout on a Long Driveway
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Asphalt Millings for a 75 Foot Driveway?
- How Much Asphalt Millings for a 100 Foot Driveway?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.