How Much Asphalt Millings for a 750 Foot Driveway?
How much asphalt millings for a 750 foot driveway: about 144.4 tons for a 12-foot-wide lane at 4 inches deep. That is 9,000 square feet and 111.11 cubic yards.
Volume and tonnage calculator →The math
- Area: 9,000.0 sq ft.
- Depth in feet: 4 ÷ 12 = 0.333 ft.
- Cubic yards: 9,000.0 × 0.333 ÷ 27 = 111.11 yd³.
- Tons: × about 1.3 tons per yard = 144.4 tons.
The asphalt millings calculator does this for any size.
Related: How Much Gravel for a 750 Foot Driveway?
Asphalt millings needed by depth
| Depth | Cubic yards | Tons of asphalt millings | Tons +10% |
|---|---|---|---|
| 2 in | 55.56 | 72.2 | 79.4 |
| 4 in | 111.11 | 144.4 | 158.9 |
| 6 in | 166.67 | 216.7 | 238.3 |
| 8 in | 222.22 | 288.9 | 317.8 |
Tons by driveway width
| Width | Tons at 4 in | Tons at 6 in |
|---|---|---|
| 10 ft | 120.4 | 180.6 |
| 12 ft | 144.4 | 216.7 |
| 14 ft | 168.5 | 252.8 |
| 16 ft | 192.6 | 288.9 |
Related: How Much Asphalt Millings for 750 Square Feet?
Truck loads
Plan for about 158.9 tons with waste. On a 15-ton truck that is about 11 trips; spreading while dumping (a tailgate spread) puts the stone close to where it belongs.
Base and top layer
If this is a new driveway on soil, build a base of 4 to 6 inches of coarse stone first and finish with a packable surface stone. For a refresh, 2 inches over the old surface is common. Long drives benefit from a crown so water runs to the edges.
Ordering and delivery
Most quarries and landscape yards deliver by the ton; ask whether there is a minimum and a delivery fee, and where the driver can dump without damaging your lawn. Asphalt millings bind into a fairly firm surface when compacted and warmed by the sun. The scale ticket is the real weight; tons per yard here is a planning figure.
Questions people ask
How many tons of asphalt millings for a 750 ft driveway?
About 144.4 tons at 12 ft wide and 4 inches deep.
How many truck loads for a 750 ft driveway?
About 11 loads of 15 tons, including some extra.
How many tons of asphalt millings are in a cubic yard?
Roughly 1.3 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- How to Build a Gravel Driveway That Lasts
- How Much Gravel for a 100 Foot Driveway? Tons by Depth
- A Passing Pullout on a Long Driveway
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Asphalt Millings for a 500 Foot Driveway?
- How Much Asphalt Millings for a 600 Foot Driveway?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.