How Much Concrete for a 12x40 Driveway?
A 12 by 40 foot driveway is 480 square feet. How much concrete for a 12x40 driveway at the common 5-inch thickness: about 7.41 cubic yards. Most people order 8.25 yards to cover waste and an uneven base.
Concrete calculator →The math for a 12x40 driveway
- Area: 12 ft × 40 ft = 480 sq ft.
- Thickness in feet: 5 in ÷ 12 = 0.417 ft.
- Volume: 480 × 0.417 = 200.0 cubic feet.
- Cubic yards: 200.0 ÷ 27 = 7.41 yd³.
- With 10% extra: 8.15 yd³.
The concrete calculator runs the same steps for any size and thickness.
Related: How Much Concrete for a 12x40 Slab?
Concrete for a 12x40 driveway by thickness
| Thickness | Cubic feet | Cubic yards | Yards +10% | 80 lb bags | 60 lb bags |
|---|---|---|---|---|---|
| 4 in | 160.0 | 5.93 | 6.52 | 267 | 356 |
| 5 in | 200.0 | 7.41 | 8.15 | 334 | 445 |
| 6 in | 240.0 | 8.89 | 9.78 | 400 | 534 |
Bag counts assume about 0.60 cubic feet per 80 lb bag and 0.45 per 60 lb bag, rounded up.
How thick to pour it
Residential concrete driveways are usually 4 to 6 inches thick. Five inches is a sensible minimum if a pickup or delivery truck uses it, and 6 inches if heavier vehicles or an RV park on it. The apron at the street often gets the thicker section.
Related: How Much Gravel for a 12x40 Driveway?
Ordering ready-mix
Concrete is ordered by the cubic yard, and a yard is 27 cubic feet. Ready-mix plants usually sell in quarter- or half-yard steps, so round up to the next step rather than down. Running short in the middle of a pour leaves a cold joint, which is a weak seam in the driveway.
Prep before the pour
Prep matters as much as the yardage. Strip sod and soft soil, compact the subgrade, then add a compacted stone base, commonly about 4 inches. A level, firm base also keeps your thickness even, which keeps the yardage close to the math.
Joints, mesh and rebar
Cut or tool control joints so the slab cracks where you want it to. A common rule is spacing them, in feet, at no more than two to three times the slab thickness in inches, so about 12 feet apart for a 4-inch slab, and about a quarter of the slab depth deep.
Questions people ask
How many yards of concrete for a 12x40 driveway at 4 inches?
About 5.93 cubic yards, or 6.52 with 10 percent extra.
How many yards for a 12x40 driveway at 6 inches?
About 8.89 cubic yards.
How many 80 lb bags for a 12x40 driveway?
About 267 bags at 4 inches thick, before any waste allowance.
How many square feet is a 12x40 driveway?
480 square feet.
How much does a cubic yard of concrete weigh?
Roughly 4,000 pounds, or about 2 tons, for normal-weight concrete.
How thick should the base under the slab be?
About 4 inches of compacted gravel is common for residential slabs, more on soft or poorly drained soil.
Related guides
- How Much Area Does a Yard of Concrete Cover?
- How Many Bags of Concrete in a Yard? 40, 60, 80 lb
- Gravel Base Under a Concrete Slab: Depth and Tons
- How Many Yards in a Concrete Truck? Mixer Sizes
- Concrete Short Load Fee: What It Is and How to Cut It
- 60 lb vs 80 lb Concrete Bags: Yield, Count, and Cost
- Rebar vs Wire Mesh in a Slab: Which One to Use
- Cost to Pour a Concrete Slab: Per Square Foot
- How Much Concrete for a 12x25 Driveway?
- How Much Concrete for a 12x30 Driveway?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.