How Much Concrete for a 14x16 Slab?
A 14 by 16 foot slab is 224 square feet. How much concrete for a 14x16 slab at the common 4-inch thickness: about 2.77 cubic yards. Most people order 3.25 yards to cover waste and an uneven base.
Concrete calculator →The math for a 14x16 slab
- Area: 14 ft × 16 ft = 224 sq ft.
- Thickness in feet: 4 in ÷ 12 = 0.333 ft.
- Volume: 224 × 0.333 = 74.7 cubic feet.
- Cubic yards: 74.7 ÷ 27 = 2.77 yd³.
- With 10% extra: 3.04 yd³.
The concrete calculator runs the same steps for any size and thickness.
Related: How Much Concrete for a 14x16 Patio?
Concrete for a 14x16 slab by thickness
| Thickness | Cubic feet | Cubic yards | Yards +10% | 80 lb bags | 60 lb bags |
|---|---|---|---|---|---|
| 4 in | 74.7 | 2.77 | 3.04 | 125 | 166 |
| 5 in | 93.3 | 3.46 | 3.80 | 156 | 208 |
| 6 in | 112.0 | 4.15 | 4.56 | 187 | 249 |
Bag counts assume about 0.60 cubic feet per 80 lb bag and 0.45 per 60 lb bag, rounded up.
Thickness for this job
Four inches is the usual thickness for patios, walks and shed floors. Slabs that carry cars or a heavy hot tub are often poured at 5 to 6 inches, and edges are sometimes thickened where loads concentrate.
Related: How Much Gravel for a 14x16 Patio?
Truck or bags?
Concrete is ordered by the cubic yard, and a yard is 27 cubic feet. Ready-mix plants usually sell in quarter- or half-yard steps, so round up to the next step rather than down. Running short in the middle of a pour leaves a cold joint, which is a weak seam in the slab.
Prep before the pour
Under the slab, most residential pours sit on about 4 inches of compacted gravel. The base spreads the load, drains water away and keeps the slab from cracking as the soil freezes and thaws. Compact the base in thin lifts, and dampen it just before the pour so it does not pull water out of the mix.
Keeping cracks under control
Plan the joints before the pour. Panels close to square crack less than long, narrow ones, and joint spacing around 10 feet is typical for a 4-inch slab. Cut joints with a groover while the concrete is soft or with a saw within the first day.
Questions people ask
How many yards of concrete for a 14x16 slab at 4 inches?
About 2.77 cubic yards, or 3.04 with 10 percent extra.
How many yards for a 14x16 slab at 6 inches?
About 4.15 cubic yards.
How many 80 lb bags for a 14x16 slab?
About 125 bags at 4 inches thick, before any waste allowance.
How many square feet is a 14x16 slab?
224 square feet.
How many 80 lb bags make a cubic yard?
About 45. Each 80 lb bag yields roughly 0.6 cubic feet, and a cubic yard is 27 cubic feet.
When is bagged concrete practical?
Usually for jobs under about a cubic yard. Beyond that, mixing dozens of bags by hand gets slow and batches may not blend well.
Related guides
- How Much Area Does a Yard of Concrete Cover?
- How Many Bags of Concrete in a Yard? 40, 60, 80 lb
- Gravel Base Under a Concrete Slab: Depth and Tons
- How Many Yards in a Concrete Truck? Mixer Sizes
- Concrete Short Load Fee: What It Is and How to Cut It
- 60 lb vs 80 lb Concrete Bags: Yield, Count, and Cost
- Rebar vs Wire Mesh in a Slab: Which One to Use
- Cost to Pour a Concrete Slab: Per Square Foot
- How Much Concrete for a 14x14 Slab?
- How Much Concrete for a 14x15 Slab?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.