How Much Concrete for a 16x50 Driveway?
For a 16x50 driveway poured 5 inches thick, plan on about 12.35 cubic yards of concrete. That comes from 800 square feet times 0.417 feet of depth, divided by 27. How much concrete for a 16x50 driveway at other thicknesses is in the table below.
Concrete calculator →The math for a 16x50 driveway
- Area: 16 ft × 50 ft = 800 sq ft.
- Thickness in feet: 5 in ÷ 12 = 0.417 ft.
- Volume: 800 × 0.417 = 333.3 cubic feet.
- Cubic yards: 333.3 ÷ 27 = 12.35 yd³.
- With 10% extra: 13.58 yd³.
The concrete calculator runs the same steps for any size and thickness.
Related: How Much Concrete for a 16x50 Slab?
Concrete for a 16x50 driveway by thickness
| Thickness | Cubic feet | Cubic yards | Yards +10% | 80 lb bags | 60 lb bags |
|---|---|---|---|---|---|
| 4 in | 266.7 | 9.88 | 10.86 | 445 | 593 |
| 5 in | 333.3 | 12.35 | 13.58 | 556 | 741 |
| 6 in | 400.0 | 14.81 | 16.30 | 667 | 889 |
Bag counts assume about 0.60 cubic feet per 80 lb bag and 0.45 per 60 lb bag, rounded up.
How thick to pour it
Residential concrete driveways are usually 4 to 6 inches thick. Five inches is a sensible minimum if a pickup or delivery truck uses it, and 6 inches if heavier vehicles or an RV park on it. The apron at the street often gets the thicker section.
Related: How Much Gravel for a 16x50 Driveway?
Truck or bags?
Ready-mix is priced and batched by the cubic yard (27 cubic feet). Plants commonly add a small-load fee when an order is under a set minimum, so ask about it when you call. Ordering a little extra costs far less than a second truck.
Getting the ground ready
Under the slab, most residential pours sit on about 4 inches of compacted gravel. The base spreads the load, drains water away and keeps the driveway from cracking as the soil freezes and thaws. Compact the base in thin lifts, and dampen it just before the pour so it does not pull water out of the mix.
Joints and reinforcement
Plan the joints before the pour. Panels close to square crack less than long, narrow ones, and joint spacing around 8 feet is typical for a 4-inch slab. Cut joints with a groover while the concrete is soft or with a saw within the first day.
Questions people ask
How many yards of concrete for a 16x50 driveway at 4 inches?
About 9.88 cubic yards, or 10.86 with 10 percent extra.
How many yards for a 16x50 driveway at 6 inches?
About 14.81 cubic yards.
How many 80 lb bags for a 16x50 driveway?
About 445 bags at 4 inches thick, before any waste allowance.
How many square feet is a 16x50 driveway?
800 square feet.
How many 80 lb bags make a cubic yard?
About 45. Each 80 lb bag yields roughly 0.6 cubic feet, and a cubic yard is 27 cubic feet.
How thick should the base under the slab be?
About 4 inches of compacted gravel is common for residential slabs, more on soft or poorly drained soil.
Related guides
- How Much Area Does a Yard of Concrete Cover?
- How Many Bags of Concrete in a Yard? 40, 60, 80 lb
- Gravel Base Under a Concrete Slab: Depth and Tons
- How Many Yards in a Concrete Truck? Mixer Sizes
- Concrete Short Load Fee: What It Is and How to Cut It
- 60 lb vs 80 lb Concrete Bags: Yield, Count, and Cost
- Rebar vs Wire Mesh in a Slab: Which One to Use
- Cost to Pour a Concrete Slab: Per Square Foot
- How Much Concrete for a 16x30 Driveway?
- How Much Concrete for a 16x40 Driveway?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.