How Much Concrete for an 8x10 Slab?
For an 8x10 slab poured 4 inches thick, plan on about 0.99 cubic yards of concrete. That comes from 80 square feet times 0.333 feet of depth, divided by 27. How much concrete for an 8x10 slab at other thicknesses is in the table below.
Concrete calculator →The math for an 8x10 slab
- Area: 8 ft × 10 ft = 80 sq ft.
- Thickness in feet: 4 in ÷ 12 = 0.333 ft.
- Volume: 80 × 0.333 = 26.7 cubic feet.
- Cubic yards: 26.7 ÷ 27 = 0.99 yd³.
- With 10% extra: 1.09 yd³.
The concrete calculator runs the same steps for any size and thickness.
Related: How Many Bags of Concrete for an 8x10 Slab?
Concrete for an 8x10 slab by thickness
| Thickness | Cubic feet | Cubic yards | Yards +10% | 80 lb bags | 60 lb bags |
|---|---|---|---|---|---|
| 4 in | 26.7 | 0.99 | 1.09 | 45 | 60 |
| 5 in | 33.3 | 1.23 | 1.36 | 56 | 75 |
| 6 in | 40.0 | 1.48 | 1.63 | 67 | 89 |
Bag counts assume about 0.60 cubic feet per 80 lb bag and 0.45 per 60 lb bag, rounded up.
Choosing the thickness
Four inches is the usual thickness for patios, walks and shed floors. Slabs that carry cars or a heavy hot tub are often poured at 5 to 6 inches, and edges are sometimes thickened where loads concentrate.
Related: How Much Gravel for a 8x10 Patio?
Ordering ready-mix
Concrete is ordered by the cubic yard, and a yard is 27 cubic feet. Ready-mix plants usually sell in quarter- or half-yard steps, so round up to the next step rather than down. Running short in the middle of a pour leaves a cold joint, which is a weak seam in the slab.
Prep before the pour
Prep matters as much as the yardage. Strip sod and soft soil, compact the subgrade, then add a compacted stone base, commonly about 4 inches. A level, firm base also keeps your thickness even, which keeps the yardage close to the math.
Joints, mesh and rebar
Plan the joints before the pour. Panels close to square crack less than long, narrow ones, and joint spacing around 12 feet is typical for a 4-inch slab. Cut joints with a groover while the concrete is soft or with a saw within the first day.
Questions people ask
How many yards of concrete for an 8x10 slab at 4 inches?
About 0.99 cubic yards, or 1.09 with 10 percent extra.
How many yards for an 8x10 slab at 6 inches?
About 1.48 cubic yards.
How many 80 lb bags for an 8x10 slab?
About 45 bags at 4 inches thick, before any waste allowance.
How many square feet is an 8x10 slab?
80 square feet.
How many 80 lb bags make a cubic yard?
About 45. Each 80 lb bag yields roughly 0.6 cubic feet, and a cubic yard is 27 cubic feet.
When is bagged concrete practical?
Usually for jobs under about a cubic yard. Beyond that, mixing dozens of bags by hand gets slow and batches may not blend well.
Related guides
- How Much Area Does a Yard of Concrete Cover?
- How Many Bags of Concrete in a Yard? 40, 60, 80 lb
- Gravel Base Under a Concrete Slab: Depth and Tons
- How Many Yards in a Concrete Truck? Mixer Sizes
- Concrete Short Load Fee: What It Is and How to Cut It
- 60 lb vs 80 lb Concrete Bags: Yield, Count, and Cost
- Rebar vs Wire Mesh in a Slab: Which One to Use
- Cost to Pour a Concrete Slab: Per Square Foot
- How Much Concrete for a 6x60 Slab?
- How Much Concrete for an 8x60 Slab?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.