How Much Crushed Stone for a 10x16 Greenhouse Floor?
A 10 by 16 foot greenhouse covers 160 square feet. At 3 inches of crushed stone, plan on 1.48 cubic yards, or about 2.1 tons, which answers how much crushed stone for a 10x16 greenhouse floor.
Volume and tonnage calculator →The math
- Area: 160.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 160.0 × 0.250 ÷ 27 = 1.48 yd³.
- Tons: × about 1.4 tons per yard = 2.1 tons.
The crushed stone calculator does this for any size.
Related: How Much #57 Stone for a 10x16 Greenhouse Floor?
Crushed stone needed by depth
| Depth | Cubic yards | Tons of crushed stone | Tons +10% |
|---|---|---|---|
| 2 in | 0.99 | 1.4 | 1.5 |
| 3 in | 1.48 | 2.1 | 2.3 |
| 4 in | 1.98 | 2.8 | 3.0 |
| 6 in | 2.96 | 4.1 | 4.6 |
Stone for a greenhouse
A stone floor drains spilled water, holds some heat and is easy to rake clean. Many growers use about 3 inches of pea gravel or washed stone over fabric, with paver or concrete stepping paths if they roll carts.
Related: How Much Crushed Stone for a 10x16 Patio?
Before the stone goes in
Remove sod and roots, level the area and slope it slightly for drainage. Install edging so the stone stays inside the footprint.
Getting it delivered
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Crushed stone has angular faces that lock together under a compactor, which is why it holds a pad shape. Round up by about 10 percent for compaction and uneven ground.
Measuring the area
Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.
Planning the cost
Stone is usually priced per ton or per cubic yard, and delivery is often a separate charge based on distance. A full truckload can cost less per ton than a partial one, so it can pay to combine projects. Ask whether the quote includes tax, delivery and any small-load fee before you compare yards.
Questions people ask
How many tons of crushed stone for a 10x16 greenhouse floor?
About 2.1 tons at 3 inches deep.
How many yards of crushed stone for a 10x16 greenhouse floor?
About 1.48 cubic yards.
How many tons of crushed stone are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Greenhouse Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Pea Gravel for a 10x16 Greenhouse Floor?
- How Much Gravel for a 10x16 Greenhouse Floor?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.
Related answers
- How Much #57 Stone for a 10x16 Greenhouse Floor?
- How Much Crushed Stone for a 10x16 Patio?
- How Much Crushed Stone for a 12x20 Greenhouse Floor?
- How Much Crushed Stone for a 10x10 Greenhouse Floor?
- How Much Crushed Stone for a 10x12 Greenhouse Floor?
- How Much Crushed Stone for a 12x12 Greenhouse Floor?