AsphaltTons.com — asphalt tonnage calculator

How Much Crushed Stone for a 8x24 Patio?

A 8 by 24 foot patio is 192 square feet. How much crushed stone for a 8x24 patio depends on depth: at 3 inches it is about 1.78 cubic yards or 2.5 tons. Suppliers usually sell by the ton, so the tonnage is the number to give them.

Volume and tonnage calculator →

The math for a 8x24 patio

  1. Area: 8 × 24 = 192 sq ft.
  2. Depth in feet: 3 ÷ 12 = 0.250 ft.
  3. Cubic feet: 192 × 0.250 = 48.0 cu ft.
  4. Cubic yards: ÷ 27 = 1.78 yd³.
  5. Tons: × 1.4 = 2.5 tons.

The volume and tonnage calculator does this for any size.

Crushed stone needed by depth

DepthCubic yardsTons (approx.)Tons +10%
2 in1.191.71.8
3 in1.782.52.7
4 in2.373.33.7
6 in3.565.05.5

About crushed stone

Crushed stone has fractured faces, so the pieces interlock when compacted. That is why it holds a driveway or pad shape better than round stone of the same size. If the yard sells by the cubic yard instead of the ton, use the cubic-yard column directly.

Preparing the patio

Remove sod, level the area with a slight slope away from the house, and lay landscape fabric if weeds are a concern. Edging keeps loose material inside the patio footprint. For foot traffic and furniture, the depths in the table above are a reasonable starting range.

Ordering tips

  • Round up. Compaction and uneven ground eat material. Adding about 10 percent is common.
  • Delivery size. 2.7 tons fits in a single typical dump truck load; small loads may carry a delivery fee. See how many tons of gravel in a dump truck.
  • Bulk vs bags. At this size bulk delivery is usually the practical choice.
  • Where it drops. Have the truck dump as close to the patio as firm ground allows.

When to choose crushed stone

Best suited to:

  • Driveway top courses and parking pads
  • Shed and hot tub bases
  • Backfill behind walls when a clean size is used

Less suited to:

  • Barefoot areas, since angular stone is rough
  • Play areas
  • Places that need a smooth rolling surface for wheels

Quick reference numbers

  • Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
  • Per inch over 1,000 sq ft: about 4.3 tons.
  • Another size for comparison: a 20x25 area at 3 inches takes about 6.5 tons.
  • Weight used here: about 1.4 tons per cubic yard.

Common estimating mistakes

  • Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
  • Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
  • Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
  • Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.

Questions people ask

How many tons of crushed stone for a 8x24 patio?

About 2.5 tons at 3 inches deep, or 2.7 tons with 10 percent extra.

How many cubic yards is a 8x24 patio at 3 inches?

About 1.78 cubic yards.

How much does a cubic yard of crushed stone weigh?

Usually around 1.35 to 1.5 tons, depending on stone size, fines and moisture.

How deep should crushed stone be for a patio?

The table above shows 2 to 6 inches. Shallower depths suit top dressing; deeper depths suit new installs and heavier use.

How many square feet is 8x24?

192 square feet.

Related guides

Open the volume and tonnage calculator → Asphalt tonnage calculator →

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.