How Much Crusher Run for 800 Square Feet?
How much crusher run for 800 square feet depends on depth. At 6 inches you need about 14.81 cubic yards, roughly 23.0 tons at 1.55 tons per yard. At 3 inches the order drops to 11.5 tons.
Volume and tonnage calculator →Crusher run for 800 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 3 in | 7.41 | 11.5 | 12.6 |
| 4 in | 9.88 | 15.3 | 16.8 |
| 6 in | 14.81 | 23.0 | 25.3 |
| 8 in | 19.75 | 30.6 | 33.7 |
Working it out
- 800 sq ft × (6 ÷ 12) ft = 400.0 cubic feet.
- ÷ 27 = 14.81 cubic yards.
- × 1.55 tons per yard = 23.0 tons.
About crusher run
The fines in crusher run fill the gaps between stones, so it weighs more per yard than clean stone once compacted. Plan on rolling or plate-compacting it in lifts. Expect the weight to fall in the range of 1.5 to 1.7 compacted tons per yard.
Before the truck comes
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
When to choose crusher run
Best suited to:
- Base under asphalt, pavers or concrete
- Gravel drives that need a firm, packed surface
- Shed pads and equipment pads
Think twice for:
- Drainage layers, since the fines slow water
- Decorative beds
- Spots where you want water to soak straight through
Quick reference numbers
- Per inch over 100 sq ft: about 0.48 tons of crusher run (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.8 tons.
- Another size for comparison: a 8x16 area at 3 inches takes about 1.8 tons.
- Weight used here: about 1.55 tons per cubic yard.
Mistakes that throw off the order
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
Questions people ask
How many tons of crusher run for 800 square feet?
About 23.0 tons at 6 inches deep.
How many cubic yards of crusher run for 800 square feet?
About 14.81 yards at 6 inches.
How much crusher run for 800 square feet at 3 inches?
About 11.5 tons, or 7.41 cubic yards.
How much does a yard of crusher run weigh?
About 1.5 to 1.7 compacted tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Crusher Run for 600 Square Feet?
- How Much Crusher Run for 750 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.