How Much Does 14 Tons of Asphalt Cover?
How much does 14 tons of asphalt cover: about 1,159 square feet at 2 inches compacted and about 772 square feet at 3 inches, using 145 pounds per cubic foot. The thickness choice changes coverage more than anything else.
Asphalt tonnage calculator →Coverage by thickness
| Thickness | Square feet | Square yards |
|---|---|---|
| 1.5 in | 1,545 | 172 |
| 2 in | 1,159 | 129 |
| 2.5 in | 927 | 103 |
| 3 in | 772 | 86 |
| 4 in | 579 | 64 |
The math
- 14 tons × 2,000 = 28,000 lb.
- ÷ 145 lb per cu ft = 193.1 cu ft.
- ÷ (2 ÷ 12) ft = 1,159 sq ft at 2 inches.
Sizing it up
772 square feet is roughly a 27 by 27 foot square, or a 12-foot-wide strip about 64 feet long at 3 inches. That is typical of a residential driveway.
Things to keep in mind
- Density varies from about 140 to 150 lb per cubic foot by mix.
- Waste and base dips use 5 to 10 percent more.
- Truck loads: 14 tons is about 1 typical tandem load.
Use the asphalt tonnage calculator for exact sizes.
Where asphalt fits
Works well for:
- Driveways, parking pads and private lanes that need a smooth, sealed surface
- Overlays on old pavement that is cracked but still structurally sound
- Areas where snow will be plowed, since a paved surface does not throw stone
Less suited to:
- Ground that stays soft or wet, unless the base and drainage are fixed first
- Very small patches, where bagged cold patch is often simpler
- Jobs in cold weather, since hot mix needs warm temperatures to compact properly
Quick reference numbers
- Per inch over 100 sq ft: about 0.62 tons of asphalt (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 6.2 tons.
- Another size for comparison: a 8x16 area at 2 inches takes about 1.6 tons.
- Weight used here: about 2.0 tons per cubic yard (roughly 145 lb per compacted cubic foot).
Mistakes that throw off the order
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
Questions people ask
How many square feet does 14 tons of asphalt cover at 2 inches?
About 1,159 square feet.
At 3 inches?
About 772 square feet.
At 1.5 inches?
About 1,545 square feet.
What density is assumed?
145 lb per compacted cubic foot.
Should I order extra?
Many estimators add 5 to 10 percent.
Related guides
- How Many Square Feet Does a Ton of Asphalt Cover?
- How Many Tons of Asphalt per 1,000 Square Feet?
- How Many Square Yards Does a Ton of Asphalt Cover?
- How Much Does 12 Tons of Asphalt Cover?
- How Much Does 13 Tons of Asphalt Cover?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.