How Much Does 4 Tons of Crushed Stone Cover?
How much does 4 tons of crushed stone cover depends on how deep you spread it. At about 1.4 tons per cubic yard, 4 tons is roughly 2.9 cubic yards. Spread 4 inches deep, that covers about 231 square feet. Halve the depth and you roughly double the area.
Volume and tonnage calculator →How the coverage is figured
- Tons to cubic yards: 4 ÷ 1.4 = 2.9 yd³.
- Cubic yards to cubic feet: × 27 = 77 cu ft.
- Divide by depth in feet: at 4 inches (0.333 ft), 77 ÷ 0.333 = 231 sq ft.
Coverage of 4 tons at different depths
| Depth | Square feet covered | Square yards |
|---|---|---|
| 2 in | 463 | 51 |
| 3 in | 309 | 34 |
| 4 in | 231 | 26 |
| 6 in | 154 | 17 |
About crushed stone
Crushed stone has fractured faces, so the pieces interlock when compacted. That is why it holds a driveway or pad shape better than round stone of the same size. Weight runs about 1.35 to 1.5 tons per cubic yard, so treat the table as a planning range rather than an exact figure.
What 4 tons looks like on site
4 tons is a light load that a single-axle dump truck can often handle, though legal limits vary by truck and state. Spread from the pile with a loader, skid steer or wheelbarrow, then rake to depth before compacting if the material calls for it.
- Check depth as you go. Stakes marked at the target depth help keep the spread even.
- Expect some loss. Compaction and uneven ground use more than the flat-math figure. Keep about 10 percent in reserve.
- Ask about moisture. Wet material weighs more, so a ton of it covers less.
To run your own numbers, use the volume and tonnage calculator.
When to choose crushed stone
Good uses:
- Driveway top courses and parking pads
- Shed and hot tub bases
- Backfill behind walls when a clean size is used
Poor fit for:
- Barefoot areas, since angular stone is rough
- Play areas
- Places that need a smooth rolling surface for wheels
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 14x28 area at 4 inches takes about 6.8 tons.
- Weight used here: about 1.4 tons per cubic yard.
Where estimates go wrong
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
Questions people ask
How many cubic yards is 4 tons of crushed stone?
About 2.9 cubic yards at 1.4 tons per yard.
How many square feet does 4 tons of crushed stone cover at 4 inches?
About 231 square feet.
How many square feet does 4 tons cover at 2 inches?
About 463 square feet.
How much does a yard of crushed stone weigh?
About 1.35 to 1.5 tons.
Will 4 tons fit in one truck?
It depends on the truck. Single-axle dump trucks often carry under 10 tons and tandems around 13 to 16; your supplier will know their limits.
Related guides
- How Much Does a Ton of Crushed Stone Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Many Tons of Gravel in a Dump Truck? Loads and Coverage
- How Much Does 2 Tons of Crushed Stone Cover?
- How Much Does 3 Tons of Crushed Stone Cover?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.