How Much Does a Pallet of Pavers Weigh?
How much does a pallet of pavers weigh? A typical pallet of concrete pavers weighs roughly 2,500 to 3,500 pounds, depending on paver thickness, style, and how many square feet are stacked on it. Most standard pallets cover somewhere around 100 to 130 square feet. That is far more than most pickups can safely carry, which is why paver pallets are usually delivered by a truck with a forklift or boom.
Volume and tonnage calculator →Weight per square foot
Concrete pavers weigh about as much as solid concrete of the same thickness, minus a little for chamfers and spacers.
| Paver thickness | Approximate weight per sq ft |
|---|---|
| About 2-3/8 inches (60 mm) | Roughly 25 to 28 pounds |
| About 3-1/8 inches (80 mm) | Roughly 33 to 37 pounds |
| About 4 inches (100 mm) | Roughly 42 to 47 pounds |
| Thin overlay pavers, about 1-1/4 inches | Roughly 13 to 15 pounds |
Clay brick pavers are generally in a similar range for their thickness.
Pallet weights
- Check the manufacturer’s spec sheet, which usually lists square feet per pallet and pallet weight.
- Or multiply square feet per pallet by weight per square foot.
Example: 120 square feet of 60 mm pavers at about 26 pounds per square foot is about 3,120 pounds, plus the wooden pallet.
Why the weight matters
- Hauling: a half-ton pickup’s payload is often around 1,500 to 2,300 pounds, so one full pallet can exceed it. See how much gravel a half-ton pickup can carry.
- Trailers: a single-axle utility trailer may be rated below a full pallet’s weight. Check the trailer’s rating and tires.
- Placement: pallets left on lawns, driveways, or sidewalks can leave dents or cracks. Ask the driver to set them on a firm, flat surface.
- Pallet deposits: many suppliers charge a refundable deposit on the wooden pallet.
How many pallets for a project?
Divide the project area by the square feet per pallet, then add about 5 to 10 percent for cuts and waste, more for diagonal or curved layouts. Order all pavers from the same production run if possible to avoid color differences.
Moving pavers by hand
If you must haul them yourself, take partial loads, keeping total weight within payload, and distribute weight evenly over the axle. Stack pavers tightly so they cannot shift, and strap them down. Wear gloves; edges can be sharp.
Bottom line
A pallet of pavers typically weighs about 2,500 to 3,500 pounds and covers roughly 100 to 130 square feet, depending on thickness. Check the spec sheet for exact numbers, plan delivery with a forklift truck, and never overload a pickup or trailer. Plan the rest of the job with paver base and bedding sand.
Questions people ask
How much does a pallet of pavers weigh?
Commonly about 2,500 to 3,500 pounds, depending on thickness and square footage.
How many square feet are on a pallet of pavers?
Often around 100 to 130 square feet, but it varies by product.
Can a pickup truck carry a pallet of pavers?
Usually not safely. A full pallet often exceeds a half-ton pickup’s payload.
How much does a square foot of pavers weigh?
About 25 to 28 pounds for common 60 mm concrete pavers.
Do I get money back for the pallet?
Many suppliers charge a refundable pallet deposit. Ask when ordering.
Related guides
- How Much Gravel Can a Half-Ton Pickup Carry?
- How Much Paver Base Do I Need? Depth and Tons
- How Much Sand for Pavers? Bedding and Joint Sand
- Polymeric Sand Coverage: Bags per Square Foot
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.