How Much Gravel for a 6x6 Hot Tub Pad?
How much gravel for a 6x6 hot tub pad: about 0.9 tons at 6 inches deep. The area is 36 square feet, which is 0.67 cubic yards at that depth.
Volume and tonnage calculator →The math
- Area: 36.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 36.0 × 0.500 ÷ 27 = 0.67 yd³.
- Tons: × about 1.4 tons per yard = 0.9 tons.
The gravel calculator does this for any size.
Related: How Much Gravel for a 10x10 Hot Tub Pad?
Gravel needed by depth
| Depth | Cubic yards | Tons of gravel | Tons +10% |
|---|---|---|---|
| 4 in | 0.44 | 0.6 | 0.7 |
| 6 in | 0.67 | 0.9 | 1.0 |
| 8 in | 0.89 | 1.2 | 1.4 |
Hot Tub Pad tips
Hot tubs are heavy once full of water and people. A compacted stone pad of about 4 to 6 inches, perfectly level, works for many tubs, but check the manufacturer’s base requirements before you build.
Related: How Much Gravel for a 10x12 Hot Tub Pad?
Before the stone goes in
Remove sod and roots, level the area and slope it slightly for drainage. Install edging so the stone stays inside the footprint.
Getting it delivered
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Gravel is a broad label, so confirm whether the yard means crushed or rounded stone and whether it carries fines. The scale ticket is the real weight; tons per yard here is a planning figure.
Tools for the job
For anything bigger than a small path, rent a plate compactor; hand tampers cannot match it. A wheelbarrow, shovels, a hard rake and stakes with string are the rest of the kit. Wet the stone lightly before compacting so it binds.
Measuring the area
Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.
Questions people ask
How many tons of gravel for a 6x6 hot tub pad?
About 0.9 tons at 6 inches deep.
How many yards of gravel for a 6x6 hot tub pad?
About 0.67 cubic yards.
How many tons of gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel Pad for a Hot Tub: Size, Depth, and Base
- Concrete Slab for a Hot Tub: Size, Thickness, Yards
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crusher Run for a 6x6 Hot Tub Pad?
- How Much Crushed Stone for a 6x6 Hot Tub Pad?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.