How Much Pea Gravel for a 10x12 Greenhouse Floor?
A 10 by 12 foot greenhouse covers 120 square feet. At 3 inches of pea gravel, plan on 1.11 cubic yards, or about 1.6 tons, which answers how much pea gravel for a 10x12 greenhouse floor.
Volume and tonnage calculator →The math
- Area: 120.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 120.0 × 0.250 ÷ 27 = 1.11 yd³.
- Tons: × about 1.4 tons per yard = 1.6 tons.
The gravel calculator does this for any size.
Related: How Much Gravel for a 10x12 Greenhouse Floor?
Pea gravel needed by depth
| Depth | Cubic yards | Tons of pea gravel | Tons +10% |
|---|---|---|---|
| 2 in | 0.74 | 1.0 | 1.1 |
| 3 in | 1.11 | 1.6 | 1.7 |
| 4 in | 1.48 | 2.1 | 2.3 |
| 6 in | 2.22 | 3.1 | 3.4 |
Stone for a greenhouse
A stone floor drains spilled water, holds some heat and is easy to rake clean. Many growers use about 3 inches of pea gravel or washed stone over fabric, with paver or concrete stepping paths if they roll carts.
Related: How Much Crushed Stone for a 10x12 Greenhouse Floor?
Prep
Remove sod and roots, level the area and slope it slightly for drainage. Install edging so the stone stays inside the footprint.
Buying the stone
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Pea gravel is small and rounded, comfortable underfoot, and needs edging because it rolls. Round up by about 10 percent for compaction and uneven ground.
Common mistakes
The most frequent problem is ordering for the finished depth without allowing for compaction, which can shrink a loose layer by 10 to 20 percent. Another is skipping fabric on soft soil and watching the stone vanish into the mud over the first wet season. Spreading everything in one thick layer instead of compacted lifts also leaves a soft, rutted surface.
Tools for the job
A flat shovel, a steel rake, a wheelbarrow and a rented plate compactor cover most residential pads. A landscape rake or the back of a rake levels the top layer, and a long straightedge or a level string shows high and low spots before the final pass.
Questions people ask
How many tons of pea gravel for a 10x12 greenhouse floor?
About 1.6 tons at 3 inches deep.
How many yards of pea gravel for a 10x12 greenhouse floor?
About 1.11 cubic yards.
How many tons of pea gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Greenhouse Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crushed Stone for a 10x10 Greenhouse Floor?
- How Much #57 Stone for a 10x10 Greenhouse Floor?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.