How Much Pea Gravel for an 8x10 Greenhouse Floor?
An 8 by 10 foot greenhouse covers 80 square feet. At 3 inches of pea gravel, plan on 0.74 cubic yards, or about 1.0 tons, which answers how much pea gravel for an 8x10 greenhouse floor.
Volume and tonnage calculator →The math
- Area: 80.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 80.0 × 0.250 ÷ 27 = 0.74 yd³.
- Tons: × about 1.4 tons per yard = 1.0 tons.
The gravel calculator does this for any size.
Related: How Much Gravel for an 8x10 Greenhouse Floor?
Pea gravel needed by depth
| Depth | Cubic yards | Tons of pea gravel | Tons +10% |
|---|---|---|---|
| 2 in | 0.49 | 0.7 | 0.8 |
| 3 in | 0.74 | 1.0 | 1.1 |
| 4 in | 0.99 | 1.4 | 1.5 |
| 6 in | 1.48 | 2.1 | 2.3 |
Greenhouse tips
A stone floor drains spilled water, holds some heat and is easy to rake clean. Many growers use about 3 inches of pea gravel or washed stone over fabric, with paver or concrete stepping paths if they roll carts.
Related: How Much Crushed Stone for an 8x10 Greenhouse Floor?
Before the stone goes in
Remove sod and roots, level the area and slope it slightly for drainage. Install edging so the stone stays inside the footprint.
Buying the stone
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Pea gravel is small and rounded, comfortable underfoot, and needs edging because it rolls. The scale ticket is the real weight; tons per yard here is a planning figure.
Measuring the area
Measure length and width in feet at a few points and use the largest figures, since real sites are rarely square. For odd shapes, split the area into rectangles and circles, work out each one and add them together. Depth is the number most people underestimate: drive a stake, run a level string and measure down to the dug-out surface in several spots.
Common mistakes
The most frequent problem is ordering for the finished depth without allowing for compaction, which can shrink a loose layer by 10 to 20 percent. Another is skipping fabric on soft soil and watching the stone vanish into the mud over the first wet season. Spreading everything in one thick layer instead of compacted lifts also leaves a soft, rutted surface.
Questions people ask
How many tons of pea gravel for an 8x10 greenhouse floor?
About 1.0 tons at 3 inches deep.
How many yards of pea gravel for an 8x10 greenhouse floor?
About 0.74 cubic yards.
How many tons of pea gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- Gravel for a Greenhouse Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crushed Stone for an 8x8 Greenhouse Floor?
- How Much #57 Stone for an 8x8 Greenhouse Floor?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.