How Much Sand for 750 Square Feet?
How much sand for 750 square feet depends on depth. At 3 inches you need about 6.94 cubic yards, roughly 9.4 tons at 1.35 tons per yard. Each inch of depth over 750 square feet adds about 2.31 yards.
Volume and tonnage calculator →Sand for 750 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 1 in | 2.31 | 3.1 | 3.4 |
| 2 in | 4.63 | 6.3 | 6.9 |
| 3 in | 6.94 | 9.4 | 10.3 |
| 4 in | 9.26 | 12.5 | 13.8 |
Working it out
- 750 sq ft × (3 ÷ 12) ft = 187.5 cubic feet.
- ÷ 27 = 6.94 cubic yards.
- × 1.35 tons per yard = 9.4 tons.
About sand
Sand weight changes a lot with moisture. Damp sand can weigh noticeably more per yard than dry sand, so a ton of wet sand covers less area than the same ton dry. Expect the weight to fall in the range of 1.3 to 1.5 dry tons per yard.
Before the truck comes
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Good and poor uses for sand
Good uses:
- Paver and flagstone bedding
- Leveling under above-ground pools (with the right product)
- Filling joints and backfilling pipe
Poor fit for:
- Driveway bases, since sand shifts under load
- Steep areas exposed to runoff
- Thick layers under pavers, which settle unevenly
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of sand (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 8x16 area at 2 inches takes about 1.1 tons.
- Weight used here: about 1.35 tons per cubic yard.
Mistakes that throw off the order
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
Questions people ask
How many tons of sand for 750 square feet?
About 9.4 tons at 3 inches deep.
How many cubic yards of sand for 750 square feet?
About 6.94 yards at 3 inches.
How much sand for 750 square feet at 1 inches?
About 3.1 tons, or 2.31 cubic yards.
How much does a yard of sand weigh?
About 1.3 to 1.5 dry tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- How Much Does a Ton of Sand Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Sand for 500 Square Feet?
- How Much Sand for 600 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.