How Much River Rock for a 15 Foot Circle?
Round areas such as fire pit patios, tree rings and seating circles use less stone than a square of the same width. A 15-foot circle is about 176.7 square feet; at 3 inches that is 2.2 tons of river rock.
Volume and tonnage calculator →The math
- Area: 176.7 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 176.7 × 0.250 ÷ 27 = 1.64 yd³.
- Tons: × about 1.35 tons per yard = 2.2 tons.
The gravel calculator does this for any size.
Related: How Much Gravel for a 15 Foot Circle?
River rock needed by depth
| Depth | Cubic yards | Tons of river rock | Tons +10% |
|---|---|---|---|
| 2 in | 1.09 | 1.5 | 1.6 |
| 3 in | 1.64 | 2.2 | 2.4 |
| 4 in | 2.18 | 2.9 | 3.2 |
| 6 in | 3.27 | 4.4 | 4.9 |
Using a circle of stone
A round gravel area is easy to lay out with a stake and string at the center. Set flexible edging along the line and lay fabric inside before the stone goes in. Do not pile stone against tree trunks; leave a gap at the base.
Related: How Much Crushed Stone for a 15 Foot Circle?
Ordering and delivery
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. River rock is smooth and decorative; larger sizes cover less area per ton at the same depth. The scale ticket is the real weight; tons per yard here is a planning figure.
Planning the cost
Stone is usually priced per ton or per cubic yard, and delivery is often a separate charge based on distance. A full truckload can cost less per ton than a partial one, so it can pay to combine projects. Ask whether the quote includes tax, delivery and any small-load fee before you compare yards.
Measuring the area
Measure length and width in feet at a few points and use the largest figures, since real sites are rarely square. For odd shapes, split the area into rectangles and circles, work out each one and add them together. Depth is the number most people underestimate: drive a stake, run a level string and measure down to the dug-out surface in several spots.
Questions people ask
How many tons of river rock for a 15 ft circle?
About 2.2 tons at 3 inches deep.
How many square feet is a 15 foot circle?
About 176.7 square feet.
How many tons of river rock are in a cubic yard?
Roughly 1.35 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Fire Pit Area: Best Types and Depth
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for a 14 Foot Circle?
- How Much Pea Gravel for a 15 Foot Circle?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.