Tons of Recycled Concrete Aggregate per Mile of 24 ft Road
Tons of recycled concrete aggregate per mile of 24 foot road: about 2,034 tons at 4 inches deep. The strip is 24 ft × 5,280 ft = 126,720 square feet. Long runs magnify small depth changes, so pin the depth down before ordering.
Volume and tonnage calculator →Tons by depth
| Depth | Tons | Truckloads (~14 t) |
|---|---|---|
| 3 in | 1,525 | 109 |
| 4 in | 2,034 | 146 |
| 6 in | 3,051 | 218 |
| 8 in | 4,068 | 291 |
The math
- Area: 24 × 5,280 = 126,720 sq ft.
- Volume at 4 in: 126,720 × 0.333 = 42,240 cu ft (1,564 cubic yards).
- × 1.3 tons per yard = 2,034 tons.
What goes into the section
A 24-foot width gives two full lanes. Recycled concrete aggregate is crushed old concrete. It compacts well and often costs less than virgin stone, which makes it a common driveway and pad base. Crown the surface so water sheds to ditches on both sides.
Practical notes
- Phasing. Large tonnages are delivered over days; schedule spreading and compaction to keep up with trucks.
- Waste. Allow 5 to 10 percent.
- Hauling. Distance from the quarry or plant often costs as much as the material on long jobs; see asphalt hauling cost per ton.
Check other sizes with the volume and tonnage calculator.
When to choose recycled concrete aggregate
Good uses:
- Driveway and pad bases
- Temporary construction entrances
- Fill under slabs when compacted in lifts
Less suited to:
- Near ponds, streams or sensitive plants, since fresh crush can raise pH
- Decorative top layers
- Drainage layers, unless the product is clean and screened
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of recycled concrete aggregate (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 10x20 area at 2 inches takes about 1.6 tons.
- Weight used here: about 1.3 tons per cubic yard.
Where estimates go wrong
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Questions people ask
How many tons of recycled concrete aggregate per mile of 24 ft road?
About 2,034 tons at 4 inches.
How many truckloads is that?
About 146 loads at roughly 14 tons each.
How many square feet is mile of 24 ft road?
126,720 square feet.
Should I add extra for waste?
Yes, 5 to 10 percent is common.
Does this include the shoulders?
No. Measure shoulders and pullouts separately and add them.
Related guides
- How Many Tons of Gravel in a Dump Truck? Loads and Coverage
- Asphalt Hauling Cost Per Ton: What Drives the Delivered Price
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons of Recycled Concrete Aggregate per Mile of 22 ft Road
- Recycled Concrete Aggregate Tons per 100 Feet, 22 ft Road
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.