10 Cubic Yards of Recycled Concrete Aggregate in Tons
10 cubic yards of recycled concrete aggregate in tons works out to about 13.0 tons using a planning weight of 1.3 tons per yard. Real loads land between roughly 12.0 and 14.0 tons depending on stone size, fines and moisture. That is about 26,000 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 10 × 1.3 = 13.0 tons.
- Low end: 10 × 1.2 = 12.0 tons.
- High end: 10 × 1.4 = 14.0 tons.
The scale ticket on delivery day is the final word on weight.
What 10 yards covers
| Depth | Square feet |
|---|---|
| 3 in | 1,080 |
| 4 in | 810 |
| 6 in | 540 |
About recycled concrete aggregate
Recycled concrete aggregate is crushed old concrete. It compacts well and often costs less than virgin stone, which makes it a common driveway and pad base.
Hauling 10 yards
At about 13.0 tons, this is roughly a tandem-axle truckload. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices recycled concrete aggregate by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
Good and poor uses for recycled concrete aggregate
Works well for:
- Driveway and pad bases
- Temporary construction entrances
- Fill under slabs when compacted in lifts
Think twice for:
- Near ponds, streams or sensitive plants, since fresh crush can raise pH
- Decorative top layers
- Drainage layers, unless the product is clean and screened
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of recycled concrete aggregate (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 8x16 area at 4 inches takes about 2.1 tons.
- Weight used here: about 1.3 tons per cubic yard.
Common estimating mistakes
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
Questions people ask
How many tons is 10 yards of recycled concrete aggregate?
About 13.0 tons, with a typical range of 12.0 to 14.0.
How many pounds is 10 cubic yards of recycled concrete aggregate?
About 26,000 pounds.
How much area does 10 yards of recycled concrete aggregate cover at 4 inches?
About 810 square feet.
Why does recycled concrete aggregate weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 8 Cubic Yards of Recycled Concrete Aggregate in Tons
- 9 Cubic Yards of Recycled Concrete Aggregate in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.