8 Cubic Yards of Recycled Concrete Aggregate in Tons
8 cubic yards of recycled concrete aggregate in tons works out to about 10.4 tons using a planning weight of 1.3 tons per yard. Real loads land between roughly 9.6 and 11.2 tons depending on stone size, fines and moisture. That is about 20,800 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 8 × 1.3 = 10.4 tons.
- Low end: 8 × 1.2 = 9.6 tons.
- High end: 8 × 1.4 = 11.2 tons.
If your supplier quotes a different weight per yard, multiply by theirs.
What 8 yards covers
| Depth | Square feet |
|---|---|
| 3 in | 864 |
| 4 in | 648 |
| 6 in | 432 |
About recycled concrete aggregate
Recycled concrete aggregate is crushed old concrete. It compacts well and often costs less than virgin stone, which makes it a common driveway and pad base.
Hauling 8 yards
Plan the delivery around 10.4 tons: one tandem in most areas. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices recycled concrete aggregate by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
When to choose recycled concrete aggregate
Works well for:
- Driveway and pad bases
- Temporary construction entrances
- Fill under slabs when compacted in lifts
Poor fit for:
- Near ponds, streams or sensitive plants, since fresh crush can raise pH
- Decorative top layers
- Drainage layers, unless the product is clean and screened
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of recycled concrete aggregate (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 14x28 area at 2 inches takes about 3.1 tons.
- Weight used here: about 1.3 tons per cubic yard.
Where estimates go wrong
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
Questions people ask
How many tons is 8 yards of recycled concrete aggregate?
About 10.4 tons, with a typical range of 9.6 to 11.2.
How many pounds is 8 cubic yards of recycled concrete aggregate?
About 20,800 pounds.
How much area does 8 yards of recycled concrete aggregate cover at 4 inches?
About 648 square feet.
Why does recycled concrete aggregate weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 6 Cubic Yards of Recycled Concrete Aggregate in Tons
- 7 Cubic Yards of Recycled Concrete Aggregate in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.