3 Cubic Yards of Recycled Concrete Aggregate in Tons
3 cubic yards of recycled concrete aggregate in tons works out to about 3.9 tons using a planning weight of 1.3 tons per yard. Real loads land between roughly 3.6 and 4.2 tons depending on stone size, fines and moisture. That is about 7,800 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 3 × 1.3 = 3.9 tons.
- Low end: 3 × 1.2 = 3.6 tons.
- High end: 3 × 1.4 = 4.2 tons.
The scale ticket on delivery day is the final word on weight.
What 3 yards covers
| Depth | Square feet |
|---|---|
| 3 in | 324 |
| 4 in | 243 |
| 6 in | 162 |
About recycled concrete aggregate
Ask whether the recycled concrete has been screened for rebar and debris. Fresh-crushed concrete can also be alkaline, so keep it away from sensitive plantings and streams.
Hauling 3 yards
Plan the delivery around 3.9 tons: one small truck in most areas. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices recycled concrete aggregate by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
When to choose recycled concrete aggregate
Good uses:
- Driveway and pad bases
- Temporary construction entrances
- Fill under slabs when compacted in lifts
Poor fit for:
- Near ponds, streams or sensitive plants, since fresh crush can raise pH
- Decorative top layers
- Drainage layers, unless the product is clean and screened
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of recycled concrete aggregate (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 8x16 area at 3 inches takes about 1.5 tons.
- Weight used here: about 1.3 tons per cubic yard.
Mistakes that throw off the order
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
Questions people ask
How many tons is 3 yards of recycled concrete aggregate?
About 3.9 tons, with a typical range of 3.6 to 4.2.
How many pounds is 3 cubic yards of recycled concrete aggregate?
About 7,800 pounds.
How much area does 3 yards of recycled concrete aggregate cover at 4 inches?
About 243 square feet.
Why does recycled concrete aggregate weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 2 Cubic Yards of Recycled Concrete Aggregate in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.