14 Cubic Yards of Sand in Tons
14 cubic yards of sand in tons works out to about 18.9 tons using a planning weight of 1.35 tons per yard. Real loads land between roughly 18.2 and 21.0 tons depending on stone size, fines and moisture. That is about 37,800 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 14 × 1.35 = 18.9 tons.
- Low end: 14 × 1.3 = 18.2 tons.
- High end: 14 × 1.5 = 21.0 tons.
The scale ticket on delivery day is the final word on weight.
What 14 yards covers
| Depth | Square feet |
|---|---|
| 1 in | 4,536 |
| 2 in | 2,268 |
| 3 in | 1,512 |
| 4 in | 1,134 |
About sand
Sand weight changes a lot with moisture. Damp sand can weigh noticeably more per yard than dry sand, so a ton of wet sand covers less area than the same ton dry.
Hauling 14 yards
Plan the delivery around 18.9 tons: two or more trucks in most areas. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices sand by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
Where sand fits
Best suited to:
- Paver and flagstone bedding
- Leveling under above-ground pools (with the right product)
- Filling joints and backfilling pipe
Less suited to:
- Driveway bases, since sand shifts under load
- Steep areas exposed to runoff
- Thick layers under pavers, which settle unevenly
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of sand (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 20x25 area at 3 inches takes about 6.3 tons.
- Weight used here: about 1.35 tons per cubic yard.
Common estimating mistakes
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Questions people ask
How many tons is 14 yards of sand?
About 18.9 tons, with a typical range of 18.2 to 21.0.
How many pounds is 14 cubic yards of sand?
About 37,800 pounds.
How much area does 14 yards of sand cover at 3 inches?
About 1,512 square feet.
Why does sand weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- How Much Does a Ton of Sand Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 12 Cubic Yards of Sand in Tons
- 13 Cubic Yards of Sand in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.