15 Cubic Yards of Pea Gravel in Tons
15 cubic yards of pea gravel in tons works out to about 21.0 tons using a planning weight of 1.4 tons per yard. Real loads land between roughly 19.5 and 22.5 tons depending on stone size, fines and moisture. That is about 42,000 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 15 × 1.4 = 21.0 tons.
- Low end: 15 × 1.3 = 19.5 tons.
- High end: 15 × 1.5 = 22.5 tons.
The scale ticket on delivery day is the final word on weight.
What 15 yards covers
| Depth | Square feet |
|---|---|
| 2 in | 2,430 |
| 3 in | 1,620 |
| 4 in | 1,215 |
About pea gravel
Pea gravel is small, rounded stone, usually around 3/8 inch. It is comfortable to walk on and drains well, but it shifts under car tires and needs a solid edge to stay put.
Hauling 15 yards
At about 21.0 tons, this is more than one typical truckload. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices pea gravel by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
Where pea gravel fits
Works well for:
- Patios, walkways and dog runs
- Play areas with proper depth and edging
- Drainage around foundations when sized properly
Poor fit for:
- Driveways and steep paths, where it rolls and ruts
- Under pavers as a base
- Areas without edging
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of pea gravel (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 14x28 area at 2 inches takes about 3.4 tons.
- Weight used here: about 1.4 tons per cubic yard.
Where estimates go wrong
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
Questions people ask
How many tons is 15 yards of pea gravel?
About 21.0 tons, with a typical range of 19.5 to 22.5.
How many pounds is 15 cubic yards of pea gravel?
About 42,000 pounds.
How much area does 15 yards of pea gravel cover at 3 inches?
About 1,620 square feet.
Why does pea gravel weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 13 Cubic Yards of Pea Gravel in Tons
- 14 Cubic Yards of Pea Gravel in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.