19 Cubic Yards of Recycled Concrete Aggregate in Tons
19 cubic yards of recycled concrete aggregate in tons works out to about 24.7 tons using a planning weight of 1.3 tons per yard. Real loads land between roughly 22.8 and 26.6 tons depending on stone size, fines and moisture. That is about 49,400 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 19 × 1.3 = 24.7 tons.
- Low end: 19 × 1.2 = 22.8 tons.
- High end: 19 × 1.4 = 26.6 tons.
The scale ticket on delivery day is the final word on weight.
What 19 yards covers
| Depth | Square feet |
|---|---|
| 3 in | 2,052 |
| 4 in | 1,539 |
| 6 in | 1,026 |
About recycled concrete aggregate
Ask whether the recycled concrete has been screened for rebar and debris. Fresh-crushed concrete can also be alkaline, so keep it away from sensitive plantings and streams.
Hauling 19 yards
Plan the delivery around 24.7 tons: two or more trucks in most areas. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices recycled concrete aggregate by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
When to choose recycled concrete aggregate
Works well for:
- Driveway and pad bases
- Temporary construction entrances
- Fill under slabs when compacted in lifts
Less suited to:
- Near ponds, streams or sensitive plants, since fresh crush can raise pH
- Decorative top layers
- Drainage layers, unless the product is clean and screened
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of recycled concrete aggregate (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 14x28 area at 4 inches takes about 6.3 tons.
- Weight used here: about 1.3 tons per cubic yard.
Where estimates go wrong
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
Questions people ask
How many tons is 19 yards of recycled concrete aggregate?
About 24.7 tons, with a typical range of 22.8 to 26.6.
How many pounds is 19 cubic yards of recycled concrete aggregate?
About 49,400 pounds.
How much area does 19 yards of recycled concrete aggregate cover at 4 inches?
About 1,539 square feet.
Why does recycled concrete aggregate weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 17 Cubic Yards of Recycled Concrete Aggregate in Tons
- 18 Cubic Yards of Recycled Concrete Aggregate in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.