How Much Road Base for a 30x50 Pole Barn?
How much road base for a 30x50 pole barn: about 41.7 tons for a 6-inch pad covering the 1,500 square foot footprint. Many builders extend the pad a foot or two past the walls, which adds material.
Volume and tonnage calculator →The math
- Area: 1,500.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 1,500.0 × 0.500 ÷ 27 = 27.78 yd³.
- Tons: × about 1.5 tons per yard = 41.7 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 30x50 Pole Barn?
Road base needed by depth
| Depth | Cubic yards | Tons of road base | Tons +10% |
|---|---|---|---|
| 4 in | 18.52 | 27.8 | 30.6 |
| 6 in | 27.78 | 41.7 | 45.8 |
| 8 in | 37.04 | 55.6 | 61.1 |
| 12 in | 55.56 | 83.3 | 91.7 |
Pole barn pad depth
Plan the pad around what the barn will hold. Hay and tools sit fine on 4 inches of compacted stone; tractors, trucks or a later slab pour justify 6 to 8 inches built up in compacted lifts.
Related: How Much Crushed Stone for a 30x50 Pole Barn?
Extending the pad past the walls
Adding 1 foot on every side makes the pad 32x52, or 1,664 sq ft. At 6 inches that is about 46.2 tons. A wider apron sheds water away from the posts and gives the eave drip a place to land.
Build it in layers
Remove sod and organic soil first. Compact the subgrade, then place and compact the stone in thin lifts. If the barn floor will be stone permanently, finish with a material that has fines so it packs firm.
Buying the stone
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Road base is a graded stone-and-fines mix built to compact into a load-bearing layer. The scale ticket is the real weight; tons per yard here is a planning figure.
Questions people ask
How many tons of road base for a 30x50 pole barn?
About 41.7 tons at 6 inches deep.
How many yards of road base for a 30x50 pad?
About 27.78 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of road base are in a cubic yard?
Roughly 1.5 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Road Base for a 30x40 Pole Barn?
- How Much Road Base for a 30x48 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.