How Much Gravel for a 30x50 Pole Barn?
A 30 by 50 pole barn covers 1,500 square feet. Spread 6 inches deep, the pad takes about 27.78 cubic yards, which is roughly 38.9 tons of gravel. That answers how much gravel for a 30x50 pole barn for a typical floor base.
Volume and tonnage calculator →The math
- Area: 1,500.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 1,500.0 × 0.500 ÷ 27 = 27.78 yd³.
- Tons: × about 1.4 tons per yard = 38.9 tons.
The gravel calculator does this for any size.
Related: How Much Crushed Stone for a 30x50 Pole Barn?
Gravel needed by depth
| Depth | Cubic yards | Tons of gravel | Tons +10% |
|---|---|---|---|
| 4 in | 18.52 | 25.9 | 28.5 |
| 6 in | 27.78 | 38.9 | 42.8 |
| 8 in | 37.04 | 51.9 | 57.0 |
| 12 in | 55.56 | 77.8 | 85.6 |
Pole barn pad depth
Plan the pad around what the barn will hold. Hay and tools sit fine on 4 inches of compacted stone; tractors, trucks or a later slab pour justify 6 to 8 inches built up in compacted lifts.
Related: How Much #57 Stone for a 30x50 Pole Barn?
Extending the pad past the walls
Many owners run the stone 1 foot beyond each wall: 32x52 feet, 1,664 sq ft, about 43.1 tons at 6 inches. It keeps mud away from the doors and protects the post bases.
Build it in layers
Strip topsoil, level and compact the subgrade, then spread stone in lifts of about 3 to 4 inches, compacting each. A coarser base topped with a finer, packable stone often makes the most solid floor.
Ordering and delivery
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Gravel is a broad label, so confirm whether the yard means crushed or rounded stone and whether it carries fines. Round up by about 10 percent for compaction and uneven ground.
Questions people ask
How many tons of gravel for a 30x50 pole barn?
About 38.9 tons at 6 inches deep.
How many yards of gravel for a 30x50 pad?
About 27.78 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for a 30x40 Pole Barn?
- How Much Gravel for a 30x48 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.