How Much Road Base for a 40x64 Pole Barn?
A 40 by 64 pole barn covers 2,560 square feet. Spread 6 inches deep, the pad takes about 47.41 cubic yards, which is roughly 71.1 tons of road base. That answers how much road base for a 40x64 pole barn for a typical floor base.
Volume and tonnage calculator →The math
- Area: 2,560.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 2,560.0 × 0.500 ÷ 27 = 47.41 yd³.
- Tons: × about 1.5 tons per yard = 71.1 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 40x64 Pole Barn?
Road base needed by depth
| Depth | Cubic yards | Tons of road base | Tons +10% |
|---|---|---|---|
| 4 in | 31.60 | 47.4 | 52.1 |
| 6 in | 47.41 | 71.1 | 78.2 |
| 8 in | 63.21 | 94.8 | 104.3 |
| 12 in | 94.81 | 142.2 | 156.4 |
How deep the barn pad should be
A 4-inch layer works for storage and light use on firm soil. For equipment, vehicles or a future concrete floor, 6 to 8 inches of compacted stone is common, and soft ground may need more plus fabric underneath.
Related: How Much Crushed Stone for a 40x64 Pole Barn?
Extending the pad past the walls
Adding 1 foot on every side makes the pad 42x66, or 2,772 sq ft. At 6 inches that is about 77.0 tons. A wider apron sheds water away from the posts and gives the eave drip a place to land.
Layering the base
Strip topsoil, level and compact the subgrade, then spread stone in lifts of about 3 to 4 inches, compacting each. A coarser base topped with a finer, packable stone often makes the most solid floor.
Buying the stone
Most quarries and landscape yards deliver by the ton; ask whether there is a minimum and a delivery fee, and where the driver can dump without damaging your lawn. Road base is a graded stone-and-fines mix built to compact into a load-bearing layer. Round up by about 10 percent for compaction and uneven ground.
Questions people ask
How many tons of road base for a 40x64 pole barn?
About 71.1 tons at 6 inches deep.
How many yards of road base for a 40x64 pad?
About 47.41 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of road base are in a cubic yard?
Roughly 1.5 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Road Base for a 40x40 Pole Barn?
- How Much Road Base for a 40x60 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.