How Much Gravel for a 40x64 Pole Barn?
How much gravel for a 40x64 pole barn: about 66.4 tons for a 6-inch pad covering the 2,560 square foot footprint. Many builders extend the pad a foot or two past the walls, which adds material.
Volume and tonnage calculator →The math
- Area: 2,560.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 2,560.0 × 0.500 ÷ 27 = 47.41 yd³.
- Tons: × about 1.4 tons per yard = 66.4 tons.
The gravel calculator does this for any size.
Related: How Much Crushed Stone for a 40x64 Pole Barn?
Gravel needed by depth
| Depth | Cubic yards | Tons of gravel | Tons +10% |
|---|---|---|---|
| 4 in | 31.60 | 44.2 | 48.7 |
| 6 in | 47.41 | 66.4 | 73.0 |
| 8 in | 63.21 | 88.5 | 97.3 |
| 12 in | 94.81 | 132.7 | 146.0 |
Pole barn pad depth
A 4-inch layer works for storage and light use on firm soil. For equipment, vehicles or a future concrete floor, 6 to 8 inches of compacted stone is common, and soft ground may need more plus fabric underneath.
Related: How Much #57 Stone for a 40x64 Pole Barn?
Extending the pad past the walls
Many owners run the stone 1 foot beyond each wall: 42x66 feet, 2,772 sq ft, about 71.9 tons at 6 inches. It keeps mud away from the doors and protects the post bases.
Build it in layers
Remove sod and organic soil first. Compact the subgrade, then place and compact the stone in thin lifts. If the barn floor will be stone permanently, finish with a material that has fines so it packs firm.
Getting it delivered
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Gravel is a broad label, so confirm whether the yard means crushed or rounded stone and whether it carries fines. Round up by about 10 percent for compaction and uneven ground.
Questions people ask
How many tons of gravel for a 40x64 pole barn?
About 66.4 tons at 6 inches deep.
How many yards of gravel for a 40x64 pad?
About 47.41 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for a 40x40 Pole Barn?
- How Much Gravel for a 40x60 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.