How Much Crusher Run for a 24x24 Pole Barn?
A 24 by 24 pole barn covers 576 square feet. Spread 6 inches deep, the pad takes about 10.67 cubic yards, which is roughly 16.5 tons of crusher run. That answers how much crusher run for a 24x24 pole barn for a typical floor base.
Volume and tonnage calculator →The math
- Area: 576.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 576.0 × 0.500 ÷ 27 = 10.67 yd³.
- Tons: × about 1.55 tons per yard = 16.5 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 24x24 Pole Barn?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 4 in | 7.11 | 11.0 | 12.1 |
| 6 in | 10.67 | 16.5 | 18.2 |
| 8 in | 14.22 | 22.0 | 24.2 |
| 12 in | 21.33 | 33.1 | 36.4 |
How deep the barn pad should be
A 4-inch layer works for storage and light use on firm soil. For equipment, vehicles or a future concrete floor, 6 to 8 inches of compacted stone is common, and soft ground may need more plus fabric underneath.
Related: How Much Crushed Stone for a 24x24 Pole Barn?
Extending the pad past the walls
Many owners run the stone 1 foot beyond each wall: 26x26 feet, 676 sq ft, about 19.4 tons at 6 inches. It keeps mud away from the doors and protects the post bases.
Layering the base
Strip topsoil, level and compact the subgrade, then spread stone in lifts of about 3 to 4 inches, compacting each. A coarser base topped with a finer, packable stone often makes the most solid floor.
Ordering and delivery
Most quarries and landscape yards deliver by the ton; ask whether there is a minimum and a delivery fee, and where the driver can dump without damaging your lawn. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. Ask your supplier for their own tons-per-yard number, since stone source and moisture change it.
Questions people ask
How many tons of crusher run for a 24x24 pole barn?
About 16.5 tons at 6 inches deep.
How many yards of crusher run for a 24x24 pad?
About 10.67 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crushed Stone for a 60x80 Pole Barn?
- How Much Crushed Stone for a 60x100 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.