How Much Crusher Run for a 24x30 Pole Barn?
How much crusher run for a 24x30 pole barn: about 20.7 tons for a 6-inch pad covering the 720 square foot footprint. Many builders extend the pad a foot or two past the walls, which adds material.
Volume and tonnage calculator →The math
- Area: 720.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 720.0 × 0.500 ÷ 27 = 13.33 yd³.
- Tons: × about 1.55 tons per yard = 20.7 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 24x30 Pole Barn?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 4 in | 8.89 | 13.8 | 15.2 |
| 6 in | 13.33 | 20.7 | 22.7 |
| 8 in | 17.78 | 27.6 | 30.3 |
| 12 in | 26.67 | 41.3 | 45.5 |
How deep the barn pad should be
A 4-inch layer works for storage and light use on firm soil. For equipment, vehicles or a future concrete floor, 6 to 8 inches of compacted stone is common, and soft ground may need more plus fabric underneath.
Related: How Much Crushed Stone for a 24x30 Pole Barn?
Extending the pad past the walls
Many owners run the stone 1 foot beyond each wall: 26x32 feet, 832 sq ft, about 23.9 tons at 6 inches. It keeps mud away from the doors and protects the post bases.
Layering the base
Strip topsoil, level and compact the subgrade, then spread stone in lifts of about 3 to 4 inches, compacting each. A coarser base topped with a finer, packable stone often makes the most solid floor.
Buying the stone
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. Round up by about 10 percent for compaction and uneven ground.
Questions people ask
How many tons of crusher run for a 24x30 pole barn?
About 20.7 tons at 6 inches deep.
How many yards of crusher run for a 24x30 pad?
About 13.33 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crushed Stone for a 60x100 Pole Barn?
- How Much Crusher Run for a 24x24 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.